Recent content by Daniel waldner

  1. D

    Case 801b hydraulics

    Pretty sure it does but i'l check.
  2. D

    Case 801b hydraulics

    Well what I do is push the lever all the way back to lower it then push it quickly all the way forward and pop it back into neutral.
  3. D

    Case 801b hydraulics

    Yes but I did not hook the return on the mower to the return on the eagle hitch.
  4. D

    Case 801b hydraulics

    Ok will do, and report! thanks Daniel
  5. D

    Case 801b hydraulics

    Yes John you said to make sure the hydraulic levers are it neutral Which they are. I have the hydraulic swing on the mower hooked to the auxiliary hydraulics and to lift the mower I put a coupler on the hose that lifts the 3pt. The return on the lift cylinder does not return to the tractor. Does...
  6. D

    Case 801b hydraulics

    I was cutting hay last week with my case 801b and nh 492 and after about 3 hours the hydraulics got slow lifting the mower and then wouldn't lift it at all and the pump is too hot to hold your hand on. Called John Saeli and he told my to add two qt of gear oil. and then I mowed for about 2.5...
  7. D

    Cleaning tracters

    Will oven cleaner eat gaskets and rubber seals? I am repainting my case 801b and need something to clean grease off in tight spaces but what to damage seals. :x
  8. D

    JD 1209

    Could you tell me where the identification plate is? I am going to look at it today to get the serial number. Thanks
  9. D

    JD 1209

    The rolls are not missing any rubber, just a few small cracks. The auction is on feb 20 so I will let you now the results then. I think i will probably give up to $1000 for it or is it worth more?
  10. D

    JD 1209

    At a local consignment auction is a john deere 1209 in decent condition with a few small cracks in the rolls but over all in decent condition. I would prefer a HN but right now there aren't any local. So what would you give for a decent 1209
  11. D

    Case weights

    Which Case weights fit a case 801b? Mine has one on the rear and i would like to add another one to make it even.
  12. D

    Phosphoric acid

    Is It better to spray epoxy then use body filler or the other way around? Also i'v been reading and some people use epoxy then body filler then more primer is this necessary? or can I use body filler on small dents and prime with epoxy then paint?
  13. D

    Phosphoric acid

    What do you use for a brand of epoxy primer do you use? Thanks
  14. D

    Case 830 (831) Restoration

    Would he have one for a 801b?
  15. D

    Phosphoric acid

    Or would this be better...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top