Recent content by Darrellspeed

  1. D

    Ih engine code help please

    Yes see what you are saying, I was hoping it was just an industrial code instead, numbers missing means the only way to tell is to remove the head and measure bore and stroke :(
  2. D

    Ih engine code help please

    if it was a 239 it would be in the code. I know what engine Should be in the 674, but this isn't the right one so I would like to find out the details of the code listed.
  3. D

    Ih engine code help please

    Hi can anyone help me identify an engine spec please? Engine code is DT2D315173 please note, this is not the standard engine I suspect ot was put in after the 239 failed at some point. Apparently came out of an international 674, but its a yellow engine so I'm assuming its an industrial...
  4. D

    Ford 7810 won''t lift Pick up Hitch PUH high enough.

    Hi Chris I've already used all the adjustment up, and as I px'd the 76 for this one I cant measure the rams, I have managed to move the draft lever and just about achieved the extra lift, I also believe the rock shaft is splined, but i dont know if i can just move it to one side and rotate it...
  5. D

    Ford 7810 won''t lift Pick up Hitch PUH high enough.

    No its the England type which drops down, goes under trailer loop then picks it up and then pulls up and the hooks lock under it to keep it in place.
  6. D

    Ford 7810 won''t lift Pick up Hitch PUH high enough.

    hi All, I decided to part ex my 76 in for a 7810, and the dealer told me to take my puh off the 76, and fit it on the 78 as it didn't have one. So I've got it all up in place, and slowly lifted the arms to get rhe adjustment set up, but after trying I ran out of adjustment, I've checked the part...
  7. D

    power steering leak on a ford 7610 tractor

    Hi Guys, I'm a bit rusty with tractor maintainence, haven't had a tractor for some 15 years, but recently purchased a leaky 7610, the biggest leak being this ram and have oil leaking from both sides, enough to empty the reservoir within a couple days. So due to lockdown, I'm thinking of trying...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top