Recent content by Dayermaker

  1. D

    706 starter problems

    Today the starter on my 706 was making a grinding noise so I took it off. After removing the starter I noticed that the teeth on the flywheel and starter drive were ground down about 1/16 an inch, there are metal shaving in the flywheel housing as well. Any ideas on what would cause the starter...
  2. D

    706 won't stay running

    Thanks for the replies. Finally got to it and I replaced the wires going from the ignition coil to the starter switch and soaked the carb in sea foam. Everything is running smooth now :)
  3. D

    706 won't stay running

    I recently tuned up a 706 gasser that had been sitting for several years. I installed new plugs and wires, added an electronic ignition and new coil and rebuilt the carb. I had it running fine for a few weeks but the engine ran away 1 day while I was mowing. So I shut it down immediately...
  4. D

    706 won't stay running

    I recently tuned up a 706 gasser that had been sitting for several years. I installed new plugs and wires, added an electronic ignition coil and rebuilt the carb. I Had it running fine for a few weeks but the engine ran away 1 day while I was mowing. So I shut it down immediately, I...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top