Recent content by dcb930

  1. D

    CaseIH 395

    Thanks for the information
  2. D

    CaseIH 395

    Have a customer that rolled his open station CaseIH 395 S/N JJE0011722 and destroyed all the tin work. Looking for all tin work including the grill and fenders. May be open for a complete donor tractor. This post was edited by dcb930 on 11/30/2021 at 07:22 am.
  3. D

    Bro is HOME

    Great news! Hope he gets back to full speed as soon as possible. Dave
  4. D

    Case Tractors, They make my farm life easier

    Great looking tractors!! The 1370HP's were super good tractors. So many more would have been sold if they would have had a 540/1000 rpm PTO. Dave
  5. D

    Power Red

    To Case addict.... I'm asking $19,995 for the tractor and I live near Decorah Iowa. That's in the NE corner of Iowa. (563-380-0180)
  6. D

    Power Red

    Thanks guys for all the complements. To answer some of the questions; No Don L those are steps that I fabricated for a total of 15 bucks and my time. Tried everywhere to find originals with no luck so I decided to go this way. As for the questions on what a 1896 is. As Loren stated and what I...
  7. D

    Power Red

    Been working on my 1896 off and on since spring. Today the sun showed itself for what seems like the first time in a month. I decided it was time to let it out of the shop as it is finished. Took a few pictures with my 4020 Ingersol as well. <image...
  8. D

    Power/Shift input shaft for 1896

    Rod, That's a good idea. I presume you removed stock from the inner part of the shaft so as to not compromise the overall length of the shaft? Late model shafts are also hard to come by. I called the number Loren gave me and they will get back to me. I had already called Elmer's and every other...
  9. D

    Power/Shift input shaft for 1896

    This is a last ditch effort to locate a good power/shift input shaft #A168580 for a early model 1896 Case tractor. CNH no longer makes them. If I can't locate one I have a plan B that I could resort too. If anyone else has had this dilemma and found a solution please share. Dave
  10. D

    Early RPS34 C1 Question

    Looking at your picture and pondering over it. Unless there is a reflection and I'm missing something I don't believe you have the C-1 clutch assembled properly. It appears to me that the plate isn't splined to or attached to the sun gear. From the picture it looks like another plate is directly...
  11. D

    Case Parts

    Wondering what part number is on the tag for that orange rod with the holes in it. If it's a G10743 I may be interested.
  12. D

    970 Shift Basket Shaft

    To remove the roll pin you simply drive it into the shaft until it bottoms out. Then you slide the shaft out and remove the roll pin from the shaft. The roll pin is only as long as the shaft, unless someone had installed the wrong pin previously.
  13. D

    Case One Bottom Plow

    I have one on rubber. Doesn't look like it had much use. Needs tires and paint.
  14. D

    Hard starting 970

    All good posts but please make sure the fuel shut-off lever on the injection pump is all the way forward when in the run position.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top