Recent content by deerefarmer

  1. D

    3020/3010 engine swap

    Thanks for the help. I haven't completely made up my mind if that is what i am going to do or not. I can buy the complete 3010 cheaper than i can even buy the overhaul kit for the 3020. As long as there is no major surprises it seems like that would be the way to go.
  2. D

    3020/3010 engine swap

    I dont want to hijack your post but can anyone tell me whats involved in putting a motor from a 3010 diesel into a 3020 gas. I have a gasser that needs overhauled but can get a whole 3010 rollover reasonable. Thanks.
  3. D

    John Deere 6620 rubber bushings in chaffer/sieve

    Just changed a set on a 6620 Titan II monday. I removed each piece one at a time and used a bench vise to press them in. I used a hammer and punch to remove the old ones. Not a major project but it will take some time. Also the deere service manual adamantly states to only use water as a...
  4. D

    Hdy jack I got never seen one like it before

    They come with the F-450 super duty trucks
  5. D

    JD 4630 and JD 7000 planter ??

    Check shoup manufacturing for the kit to add no-till to your planter. part number NTC3 runs 259.95 per row.
  6. D

    what ac compressor is best?

    How does the sanden conversion cool the cab? I replaced the A-6 compressor on my 4430 a couple of years ago with the sanden kit and it works alright but has never seemed like it got as cold as it should. Any advise would be appreciated.
  7. D

    144 sprayer valve problem anyone with experience

    The absolute best thing you can do is order a set of electronic ball valves. I have a Top Air 750 sprayer that had the 144 valves on it and it seemed like I was constantly working on them. I had the same problem that you are having. There was always one that didnt seem to open all the way or...
  8. D

    40 series cab inside rearview mirror

    Glad to help. They sure are a nice addition to the cab.
  9. D

    40 series cab inside rearview mirror

    Look up the part numbers from a 55 series tractor. I installed one in my 4430 using the numbers from a 4455. They use the holes already located in the cab.
  10. D

    Marker Setting for 7000 4-Row 30 Planter

    John Deere did not make a factory 7000 4 row 30" planter. You could order the conservation version which allowed you to move the row units to 30" and used a shorter main marker arm. From what you have described you have a standard 7000 that someone has modified to 30" by removing the pipe axle...
  11. D

    Where to find 3020 one wire alternator?

    You can get a one wire delco alternator from NAPA. The part number is a 213-4011SW. You can also get them from CarQuest but I do not know the p/n. I worked for NAPA and have sold and used these numerous times. They work well, you just have to rev your motor up for a minute to start the...
  12. D

    JD 404 block turn 2700 rpms or 250hp?

    2700 rpm should be fairly easy to accomplish, just adjust the throttle rod. You should be able to get the hp but it will come at a cost. If you could find a 404 block from a 4430 or a 4630 would help. The 4430 was a 404 with a turbo and a bosch "p" pump for the injector pump. My 4430 that I...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top