Recent content by dick sorensen

  1. S

    Trying to pull a sleeve-4.125 id, what od? (400)

    Can someone verify what the outside diameter of the sleeve is? I thought that the out side diameter of my sleeve was 4.375, so I made the puller with the id. at 4.122 and the od. at 4.35. It fits nicely in the sleeve, but the sleeve is not willing to move yet. I do not wish to break something...
  2. S

    Paint compatibility

    Ok, first off, I would like to admit that I am an idiot since I am certain that many of you will be thinking so after reading this... Last summer I stripped my Farmall Super H and primed and painted the chassis and most of the cast parts with (get ready for this one) the rattle can "IH red" from...
  3. D

    hd4/cat allis chalmers

    got it to move (yea) but the right pedal was low and would not turn well. toor the floor off the pedal felt like it was binding like some thing was bent or rusted, but there was this lever right below the seat well there is two of them. pushed down on the pedal and pulled the lever back...
  4. D

    hd4/cat allis chalmers

    thank you so much. one more question. is the trans mission sep from the torkconverter/ or do they use the same fluid the dozer has a gear shifter under the seat wich i do beleve is a three speed.
  5. D

    hd4/cat allis chalmers

    just got a h4/hd4 given to me. man the thing runs grate. but the guy said it will only push dirt untill it gets hot. but will still move ,gust on power. Well spent some time to get it started and when it did look out.POWER. but when we went to move it no go UNTILL he put some atf in the trans...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top