Recent content by dondeereb

  1. D

    OT: Garage Door opener keeps frying

    hi; i installed and repaired sears operators for thirty years. if it takes out only your 24v circuit it is not likely your high voltage source, the problem could be in the 24v load, ie the wiring to your door button or to the door sensors or somewhere in between. that being said, the fact...
  2. D

    OT honda rancher shift problem

    i have a 2004 honda four trax rancher AT. it has the multi function electronic display which shows what gear you are in. when i shift the gearshift into D the display does not show the D symbol like it should but will show neutral and reverse. also it will go into 1st gear but will not...
  3. D

    john deere 2020 three point

    i have a friend who just called me and said his 2020 rockshaft will not go all the way down. this is a 2020 gas two wheel drive. four cylinder. said the depth control is set all the way down. its doing this with the weight of a blade on it. any suggestions would be greatly appreciated. i...
  4. D

    OT '75 dodge pickup ignition problem

    just want to thank you you folks for your input and suggestions regarding my friends ignition problem. turns out it was not the ignition module but a device on the firewall with the words"voltage regulator-ignition". replaced that, engine started right up on one crank rotation. thanks...
  5. D

    OT '75 dodge D20 ignition problem

    my friend has a 1975 dodge D20 three quarter ton pickup with a 318 v8 engine in it. the ignition switch was accidently left on for three hours. now he has no ignition. he replaced the coil and resistor, still no spark. it has a module mounted on the fender that appears to be part of the...
  6. D

    JD 1010w gas deck plate

    thanks for the interest. i have a ten acre hobby farm, this tractor would not get worked hard and possibly be in a parade or two if i get it totally sound. it has 2000 and change on the hour mete. again thanks. don
  7. D

    JD 1010w gas deck plate

    LDJ thanks for all the info, now i have something to go on. think i will take your advice and take the top end off and see what i have. it sat with rain water in it for quite some time so am not very optimistic. we'll see. don deere
  8. D

    JD 1010w gas deck plate

    LDJ thanks for all the info, now i have something to go on. think i will take your advice and take the top end off and see what i have. it sat with rain water in it for quite some time so am not very optimistic. we'll see. don deere
  9. D

    JD 1010w gas deck plate

    Before i ask the question i have regarding my tractor i would like to comment on the responses to Larry's post a few days ago. it is really heartening to read the compassion and concern you all had for the man. we could use alot more of that in our world. i applaud all of you!! a few weeks...
  10. D

    1010 engine

    thanks for the replies fellas. the serial # on this unit is 19574. i believe it is a '61 model. this is the yellow industrial model with the solid non-adjustable front axle. thanks again don
  11. D

    1010 engine

    i just purchased a john deere 1010w with a gas engine. somehow water got into the upper end of the engine, froze and cracked the exhaust manifold and has probably done other damage. engine is frozen. don"t know if i should rebuild this one or find a decent used engine. i"ve been told...
  12. D

    LUC combine pwr unit

    have a fellow who wants to sell me a luc combine power unit. it does not run but is not stuck. does anyone out there know what would be a fair price for it? don't want to mess over anyone but don't want to pay more than it is worth either. thanks for the help. don deere
  13. D

    Carb on A

    these guys are giving you good advice. if the fellow you have lined up to rebuild it has never done it you probably should look elsewhere. they are right, carb cleaner is not of much use on these carbs, plus all the brass drill plugs must be removed and the passages drilled out with the...
  14. D

    Carb on A

    these guys are giving you good advice. if the fellow you have lined up to rebuild it has never done it you probably should look elsewhere. they are right, carb cleaner is not of much use on these carbs, plus all the brass drill plugs must be removed and the passages drilled out with the...
  15. D

    Kohler K321 14hp charging system

    had the same problem with a jacobsen tractor with a kohler engine i had just purchased used. check your ignition switch, they have two types, one for auto type ignition and one for mag type. if you have the wrong switch on it or the right one you have is defective there is no way it...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top