(800) 853-2651
SHOP NOW

Recent content by DriverChad

Yesterday's Tractor Forums
  1. D

    MF35 gas engine not running right. Help please!

    OK, I know the carb is really clean, soaked it in carb cleaner, acetone, and vinegar. Cleaned all the passages with pipe cleaners, and needles in the passages to small for the pipe cleaners. I have good flow of gas thru the needle valve, but still not able to get the mixture rich enough for the...
  2. D

    MF35 gas engine not running right. Help please!

    I put some Accel copper core wires on it, still didn't help it. Guess I'll start over from the beginning and made sure I did not miss anything. Thanks everybody for your input. Chad
  3. D

    MF35 gas engine not running right. Help please!

    Maxwell99, I soaked the carb over night and got it squeaky clean. The tractor is running better, but still not back to the way it was before all this started. Think I'm going to replace the plug wires tomorrow since that's the only thing I haven't done recently.
  4. D

    MF35 gas engine not running right. Help please!

    Tony, I replaced the air cleaner element and oil in January. I'm like you, I find the "sweet spot" when tuning something. I just set everything to factory specs for a starting point, then fine tune from there. Thanks for your response, Chad
  5. D

    MF35 gas engine not running right. Help please!

    RKH, Yes, the gas cap is venting. It even does it without the gas cap on. Thank you for your reply.
  6. D

    MF35 gas engine not running right. Help please!

    Maxwell99, No, I did not soak the carb, just used aerosol type carb cleaner and compressed air. I bought the kit from Yesterdays Tractor. Yes, all my gas cans are clean. I have a marvel schebler TSXU 834. I just tore it apart again and have it soaking now. Will let you know tomorrow evening how...
  7. D

    MF35 gas engine not running right. Help please!

    Hello All, I have a 1960 MF35 with a Continental Z134 engine. About 3 weeks ago it started spitting and sputtering and not wanting to take gas unless the choke was 1/2 set, then it would run great. Since then I have done the following and it hasn't helped a bit. 1. Thoroughly cleaned and...
  8. D

    MF35 Deluxe Tach and cable

    Thank You, already ordered a new tach and have it up and running.
  9. D

    MF35 Deluxe Tach and cable

    Thanks Jason, I had talked to an AGCO dealer earlier today and he searched by serial# and was able to provide the oem part # for me to cross reference. Thanks for the heads up on the website, I'm sure that will come in handy. Chad
  10. D

    MF35 Deluxe Tach and cable

    I seen the cable listed with the different sized ends, but I think that wouldn't be long enough, I'll go out to the garage this evening when I get home and use a tape measure and see if I can find a different way of routing to make a shorter cable work. Thanks for your replies guys, Chad
  11. D

    MF35 Deluxe Tach and cable

    I was trying to avoid having to do that since it is a brand new tach that I just paid $53 for. The only oem one I found is $120 with shipping.
  12. D

    MF35 Deluxe Tach and cable

    Hey Guys, I have a MF35 Deluxe with a continental Z134 gas engine. I ordered a new Tach and Tach cable from this site and now can't get it to hook together. The Tach was part# S.61467 and cable # 506331M91. The cable is the right length and screws into the generator just fine, the problem is the...
  13. D

    Tractor shuts down

    I just had the exact same problem. The mounting screws for the points wore out in mine and the points closed a little. The tractor would start and run fine. I would mow for about 20-30 minutes and would start shutting down. I thought it was the coil also, ran some ohm tests and the coil and...
  14. D

    8N keeps dying

    Cause it's time to do tips 37,66,67,and 68 :)
  15. D

    8N keeps dying

    Found the problem. Was the points. The gap had closed up to where there was only about .007 space between them. got them gapped at .015 now and she's runnin good. Thank you all. Chad
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top