Recent content by dustin8201

  1. dustin8201

    Help identifying tandem disc

    Looking at Messicks parts diagram for a B model disc, that is exactly what it is. Thank for the help!
  2. dustin8201

    Help identifying tandem disc

    Ok. I will see about getting some more pics shortly.
  3. dustin8201

    Help identifying tandem disc

    I recently purchased this tandem disc and am wanting to look up a few parts for it. I’ve tried google ai and it tells me it’s a case 37 or 370, however both of those models seem to have an underslung rock shaft. This one obviously has an overslung rock shaft. Any help is very appreciated. It’s...
  4. dustin8201

    Slow to build RPM?

    I’m 99% certain I found the issue. The fuel shut off never was creeping closed. I installed a spring to hold it open and the issue seems to have disappeared.
  5. dustin8201

    Slow to build RPM?

    Everything checks out. The bleeder screw shoots fuel out roughly 2 feet at start up. The tank is clean and the pet cock screen is clean. The cap seems to vent like it’s supposed to. All return lines to the tank are free flowing. The screen on the rear of the injection pump is clean. I has a a...
  6. dustin8201

    Slow to build RPM?

    I'm guessing I should remove this screw and perform this test when I start having the issue?
  7. dustin8201

    Slow to build RPM?

    Thank you for this information. I will do all of this and see where that gets me. The pump and injectors were rebuilt and tested by a Bosch dealer in St. Louis as I was no where near comfortable enough to tackle that myself.
  8. dustin8201

    Slow to build RPM?

    Maybe 30 seconds or so. It was a solid stream the whole time.
  9. dustin8201

    Slow to build RPM?

    This was also brand new 17 hours ago when I had the rank cleaned. I’ll pull it and see if there is debris on the screen.
  10. dustin8201

    Slow to build RPM?

    It doesn’t smoke at all when at normal RPM. At idle it’s just barely anything at all and it’s a light smoke but clears up when the idle is brought up just a smidge. The pump was just rebuilt along with the injector.
  11. dustin8201

    Slow to build RPM?

    I will change the filter when I get time and make sure to look at the seal to ensure it is installed properly. I will update when I do that.
  12. dustin8201

    Slow to build RPM?

    I am currently running a carquest filter on it now. I have a napa gold filter as a spare. Should I go with a different brand then?
  13. dustin8201

    Slow to build RPM?

    Thats kind of what I was thinking too. I would have noticed it bogging down due to starvation and that didnt happen.
  14. dustin8201

    Slow to build RPM?

    I checked the tank and there is some sediment in there but I can't see it being enough to choke off the fuel. I will change the fuel filter again and see if that fixes anything.
  15. dustin8201

    Slow to build RPM?

    I'll take another look at that and see if I can notice anything.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top