Recent content by ed almony

  1. E

    200 or 230

    I have both. Both have 123 engines BUT you cant put a 3 1/4 overbore kit in a 200 and you cannot in the 230 unless you bore the block. For some reason the bottom of the bore on the 230 is tapered and is smaller on the bottom then the top. The RPS is higher on the 230 which gives it a little...
  2. E

    Farmall 400 T/A

    D beatty. if your spinning out and have plenty of power you don"t want to use low range as it will give you more power to spin the wheels. You might want to gear up and use low range, that might work or go to the next class. I was told by my shop in pa that under 100 horse the regular TA is...
  3. E

    Why the overpricing, It's not goint to sell anyway!!!

    Seller can ask what he want and buyer will pay what he wants. That the free market. I"m not sure what junkers everyone is talking about. But a couple of years ago I bidded 750.oo on a junk A John Deere. The tractor went for 975.00. Yes a junk tractor with a series 3 power block. So sometimes...
  4. E

    allis id number

    look on the right side of the motor. If its a WD it will have a plate on the side of the motor with about 6 or 8 bolts, the head will be about 2 and 1/2 inches high. The WD 45 will have no plate on the right side (all cast)and the head is about 3 1/2 inches high give or take. Hope this...
  5. E

    Kaufman trailers

    two of my friends have Kaufman trailers. They haven't had any trouble. I have a three axle PJ trailer and would recommend getting a two axle. Six brakes and drums to replace instead of four on a two axle. You are going to have to combo this unit for 26000 to keep away from CDL. In Maryland...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top