(800) 853-2651
SHOP NOW

Recent content by Elanier81

Yesterday's Tractor Forums
  1. E

    H60E transmission problems

    I packed the first gear clutch pack and put back in. The other two clutch packs are 2nd and 3rd, reverse and forward. I am assuming with having the first gear clutch pack nice and tight it allowed enough oil to go to forward and reverse and make it run. 2nd gear appears to have lost its piston...
  2. E

    H60E transmission problems

    Pulled first gear clutch pack and piston seals were shot, as in shredded. Friction plates were also very worn so we are replacing them also. Question about repacking plates. There are 15 plates 14 friction plates and 14 Springs. I can get about 10 of each in the housing before I am up...
  3. E

    H60E transmission problems

    AJ, across the top, forward, reverse, 1st, 2nd, 3rd, oil supply and torque converter. Down the left side neutral, forward and reverse for each gear. We had a seperate gauge on all clutch packs, the oil supply and the torque converter simultaneously. We did this to confirm that we had...
  4. E

    H60E transmission problems

    Sorry about posting picture of the pressures twice
  5. E

    H60E transmission problems

    These are new pressure numbers for all gear positions. All pressures were taken at the same time by having different gauges on all clutch packs and torque converter at same time.
  6. E

    H60E transmission problems

    Was wondering if anyone had any idea where I could get a O-ring kit # 142897H3 for a H60E PAYLOADER with S-700 International transmission
  7. E

    H60E transmission problems

    The machine does move slightly in forward and reverse in all 3 gears now. the trash was a myriad of things there was some gasket where someone had done a horrible shotty job on the suction screen filters previously. It look like they use silicone and got some in there. Mostly just grime. The...
  8. E

    H60E transmission problems

    let's just start over on my last post completely. Prior to finding the trash in the sequencing valve throttle valve control valve pressure the control valve pressure was 250. After clearing the throttle valve the sequencing valve pressure was 220 lb. This while this was reading while the gear...
  9. E

    H60E transmission problems

    Disregard the pressure numbers. My mind was exhausted as well as my body last night. I will give the correct complete update when I get with my brother and look at the numbers we have written down. Still not running
  10. E

    H60E transmission problems

    Okay we took the control valve apart again and there was trash in it. We cleaned it out and put it back on. We had 250 lb of pressure at the control control valve before we clean the trash out of it. Now we only have 150 lb of pressure at the control valve and we know it is clean and working...
  11. E

    H60E transmission problems

  12. E

    H60E transmission problems

    We are going to test the pressures on the lube tubes going to the clutch packs next. We kind of feel like that is the last simple solution that it could be. although if it is a problem with the lube tubes within the transmission, it might not be that simple
  13. E

    H60E transmission problems

    We are going to test the pressures on the lube tubes going to the clutch packs next. We kind of feel like that is the last simple solution that it could be. although if it is a problem with the lube tubes within the transmission, it might not be that simple?
  14. E

    H60E transmission problems

    We are going to test the pressures on the lube tubes going to the clutch packs next. We kind of feel like that is the last simple solution that it could be. although if it is a problem with the lube tubes within the transmission, it might not be that simple?
  15. E

    H60E transmission problems

    I only feel the slight jerk when putting in 3rd gear first and second I don't feel anything. first and second will only barely move if I really rev It Up. I haven't looked in the book yet about the 4 wheel drive, but I don't see a lever in there anywhere so I have been assuming that it is...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top