(800) 853-2651
SHOP NOW

Recent content by Emmanuel

Yesterday's Tractor Forums
  1. E

    Case VAC PTO re-assembly

    Thank you Joe!, The confusion was indeed that I thought the I was filling the transmission, but I was filling the torque tube compartment. Thanks again for taking to time to guide me through this!! Emmanuel.
  2. E

    Case VAC PTO re-assembly

    Thank you Joe for the feedback. The thing I'm uncomfortable about is that I have about 7 gallons of dirty oil I drained out. I put 2 back in the pro compartment and about 2 gallons in the transmission which is more than full right now. So there's another 3 gallons that needs to go in 'somewhere'...
  3. E

    Case VAC PTO re-assembly

    Joe, I did indeed empty the differential/pto compartment throught the back pto cover. I gushed out and then and scooped out the rest. I was able to add a couple of gal before it would spill out and then I closed the back cover. I just drained the transmission oil and filled it back up...
  4. E

    Case VAC PTO re-assembly

    so I just add the oil for the pto where I add oil for the transmission? I couldn't see any connection between the transmission and the differential chamber where the pto is.
  5. E

    Case VAC PTO shifting fork

    Hi Joe, I was finally able to get the shifting fork and put my PTO back together, but I'm not sure how to fill it back up with oil. Any hints? Also, the place where I bought the oil said it will probably take about 5 gallons. Is that correct? I know it's important to not over or under fill...
  6. E

    Case VAC PTO re-assembly

    Hi, I have a 1950 Case VAC. I was finally able to put my PTO back together, but I'm not sure how to fill it back up with oil. Any hints out there? Also, the place where I bought the oil said it will probably take about 5 gallons. Is that correct? I know it's important to not over or under...
  7. E

    Case VAC PTO shifting fork

    Thank you Joe!! the part number embossed on the fork says indeed VT-598. Do you have any idea where I could find one? I think I have exhausted the internet already :) Thanks again, Emmanuel
  8. E

    Case VAC PTO shifting fork

    Hi, I have a Case VAC model from 1952 that needs a new shifting fork for the PTO. I have tried every possible outfit out there without any luck. Can anyone help me please? I would VERY much appreciate it! The model number is VAC 5454742. I don't know if the number is a serial or model...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top