Recent content by Emu

  1. E

    CASE 450C Dozer

    Had a 450 loader new back in the mid sixties, you are right they are not conventional like most of other crawlers, I could not fault it only thing I had against it was it was too fast and severe on tracks esp with a cowboy operator reversing the tracks, like everything else one either liked them...
  2. E

    Help Aj Poclain 600

    Had a bit of trouble getting the correct o'rings but did in the finish,never would have thought of the rings been different,I thought an o'ring was an o'ring,it is digging as well as ever now,thanks for all your help,there will be something in your Christmas stocking. CYA Eddie
  3. E

    Help Aj Poclain 600

    Aj Iv"e been told that you were familiar with Poclain equipment as well as everything else, I got an 1983 Poclain 600CK backhoe that I have been using quarrying limestone,you may say that it is time I changed it but there is no other excavator of that weight and power with the same breakout...
  4. E

    H60E transmission problems

    I had a Michigan 125B that had a similar problem but it happened while I was loading with it,no foot brake ran up to the truck I was loading, pulled the reverser back to stop,no stop till it hit the truck burst the diesel tank with the front wheel,50 gallons of diesel on the floor,the machine...
  5. E

    oil additives

    I think I would reseal the leaks rather that go buying buckets of stop leak,those additives are more for auto transmissions and the like than hydraulic cylinders,when an expensive hydraulic pump has to be considered you would buy a lot of seal kits for the price,putting the shim in like Aj said...
  6. E

    Track adjuster on TD15E

    Caution when using air to blow out the piston, I was resealing a mini diggers adjuster and was holding the cylinder and piston in my right hand, I pressed the trigger of the blow gun,the piston did not move but the grease did coming out round the piston like a razor blade and hit the palm of my...
  7. E

    Aj, VW Question

    Thanks Aj I first thought that you were having me on,I took the alternator to the local shop and had them fit a new pulley,I had to say to the guy what's wrong with the old one as it was running true and free,he told me that the freewheel clutch in the pulley was siezed,I would never have...
  8. E

    Aj, VW Question

    On the off chance you have come across the same type problem one of my drivers is having with his 09 VW Passat,the problem is when parking and manovering into a tight spot there is a hell of a racket coming from the engine,having it checked out the belt tensinor was replaced but the new one it's...
  9. E

    Aj, Rock breaker

    Thanks guys,took the bits to the hammer man and had an exchange one from him as there was no mechanic to do mine and the machine is on hire,got it back on,put the hanger hat back and it's working again,after seeing the equipment for the gassing I won't be bothering with it. Thanks again Ed
  10. E

    Aj, Rock breaker

    Aj I got a Montabert 501 breaker fitted to one of my Hitachi's,the breaker has lost power,I spoke to the dealer and he said that more than likely the accumulator diaphragm was punctured and lost the gas and that I had to remove it and take it to them and they would replace the diaphragm and...
  11. E

    diesel fuel additive, or no??

    The Bosch pump Aj mentioned the VP44 is a distributor type pump not an inline,I would bet it been called other things too that cant be posted here,I had a few small Opel powered diesel vans that my drivers use fitted with that pump and we had that trouble with them seizing up,change the pump and...
  12. E

    D4D break jumping

    I had a D4 that used to kick the brake pedal back when you put your foot on it and the cause was the final drive pinion bearing toasted, both clutches have to come out and the final stripped on the said side in order to get the pinion out,the sprocket has to be pulled and pushed not what one...
  13. E

    pacific 252 dozer

    I can't recall ever seeing one do you know if they were built by the same Canadian firm that built haul trucks,back in the old days I had a few,the last I remember of them was that IH took them over and the rest is lost to history,it was a good workhorse. Ed
  14. E

    Diesel specialist

    I think going along with the first suggestion of servicing the fuel system is the way to go,the old trick of using compressed air to push the fuel through is not the best idea as it tends to push the dirt and sediment through the filters as well with bad results for the pump,no reason why the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top