Recent content by enginegeek21

  1. E

    Farmall 560 Pivot Ball Bolts

    Hi everyone, I am replacing a farmall 560 diesels front end, and I am missing all 3 bolts that hold the pivot ball in place for a wide front end. I was wondering if anyone knows on here what size and thread pitch they are? I dont have the tools to do it. Thank you.
  2. E

    Farmall 560 Power Steering Worm Gear Help

    Hello everyone, my Farmall 560 Diesel steering worm down by steering bolster has 2 broken in half seals. I was wondering if anyone knows of a quick fix to get the power steering back and operating. Someone suggested using a PolyPak Hydraulic Cylinder Seal, but I don't know if that will be a long...
  3. E

    NH 478 Haybine Top Roller Chain Adjustment

    Fixed it!!! Theres a adjuster on the eccentric!!! Thank you so much!!!
  4. E

    NH 478 Haybine Top Roller Chain Adjustment

    I tried taking off a link, it's too short.
  5. E

    NH 478 Haybine Top Roller Chain Adjustment

    Hello everyone, our NH 478 haybine recently broke its top roller chain. We decided that the quickest fix is to go to ace hardware and buy a size 40 chain (same size as the OEM chain). But when we cut it down to size and put it onto the machine, it was way to long. So we took off a link, and...
  6. E

    What oil is best for 10-30F weather

    Hey everyone, i just got 7 inches of snow in my area, and i'm wondering which oil would be best for my tractor. It is a Ford 640 tractor. The oil is older than me, or 15 years. Should i remove oil pan and clean it??? I guess that's up to my dad to decide, but still, it probably needs it...
  7. E

    Ford 640 Tractor Oil Pressure 35 at idle

    is this a normal oil pressure range for the tractor to run at idle??? it goes down about 15-20 seconds after its put down in throttle... Could it need new oil??? It hasn't been changed since we got it from the previous owner, and he doesn't know when it was changed either... Thanks...
  8. E

    Can i use this coolant in a tractor??? Its all i have...

    Ok thanks for the help man!!! :D :D :D
  9. E

    Identifying a massey ferguson tractor

    This is the massey-harris 22... Does it look similar to the photo on this website??? http://www.tractordata.com/farm-tractors/000/7/2/725-massey-harris-22-photos.html[/code]
  10. E

    Can i use this coolant in a tractor??? Its all i have...

    Is this coolant good to use in a tractor??? Its Prestone Concentrate Antifreeze/Coolant. My Tractor is a ford 640... Thanks, Bryce C. [/img]
  11. E

    Farmall 560 Regulator And Safety Valve Adjustment???

    I get 1200psi when I'm at idle and 1300psi when the 560's screaming...
  12. E

    Farmall 560 Regulator And Safety Valve Adjustment???

    I already have one. I just upgraded from a 12gpm pump to a 17gpm pump
  13. E

    Farmall 560 Regulator And Safety Valve Adjustment???

    Is there a way to increase the hydraulic pressure on a tractor??? Our Farmall 560 diesel is way lower than what we've expected it to be (Around 1300psi) and I think I've found the part to fix the problem... Our Regulator and safety valve had worn out O-rings and gaskets, so we put new ones on...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top