Recent content by Ernest Stewart

  1. E

    John Deere 450H error Code F3H1

    Aah, but I didn't know the circuit went to the ccontroller. I learned a lesson, but to oredr a $70 service manual was something I tried to avoid.
  2. E

    John Deere 450H error Code F3H1

    Problem solved. It seems on the start rely other side from the power switch doesn't go to ground there. I tried to bypass the start circuit with a direct wire from the start switch to the relay and grounded the other side. The side I grounded was supposed to go to the transmission controller...
  3. E

    John Deere 450H error Code F3H1

    Dozer starts and hyd works, but when I try to move it I get code F3H1. The error code F3H1 indicates a problem with the Neutral Start Switch in the transmission controller of your John Deere equipment. It's advisable to check the wiring and connections related to this switch for any faults...
  4. P

    Good lineman pliers

    So I have survived with my HF pliers for years and will continue to have them on job sites where they might be borrowed... I was doing some electrical work this week and they wouldn't cut through aluminum Romex. Who makes a good set these days?
  5. kcm.MN

    2023.04.21 Round Barn

    Puzzle: https://jigex.com/MaaCK
  6. kcm.MN

    2023.04.21 Rust Pic

    Puzzle: https://jigex.com/1DRTz
  7. E

    John Deere 350B power steering parts/clutch adj. bolts

    Sure, north eastern Pa., in Bradford County.
  8. E

    John Deere 350B power steering parts/clutch adj. bolts

    Wow, something is wrong with the basic adjustments. When the weather warms up I'll have to start from scratch and work my way up. The bolts that were in the machine were grade 8 and about 3 inches long. Thanks for all the help and I'll have to get back in the spring with the results. I've...
  9. E

    John Deere 350B power steering parts/clutch adj. bolts

    I neglected to answer about the bolt description, sorry. I'll check and get back with that. It is under the plates over the finals. Ernie
  10. E

    John Deere 350B power steering parts/clutch adj. bolts

    Yes I have the service manual and operators manual. I gave up trying to adjust the clutches and brakes and had a mechanic come in and adjust them. The reservoir for the power steering was dry, so he rebuilt both power steering cylinders and readjusted them. Everything worked fine before he left...
  11. E

    John Deere 350B power steering parts/clutch adj. bolts

    I have tried this site before I posted and keep getting this message: We are experiencing a temporary issue with your request. Please refresh or try again!
  12. E

    John Deere 350B power steering parts/clutch adj. bolts

    I keep bending the bolts that the power steering output to the clutches and brakes adjustment. I can't find a grade 8 bolts that have full threads and have had to thread the bolts. Am I weakening the bolts by cutting new threads? Is there a Deere part number for these bolts? The machine works...
  13. E

    John Deere 730 Service Mannual availble?

    Ok, that is what they have told me, but their ad shows a picture as being the 730. Thanks for the help. SF
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top