Recent content by Ernie000

  1. E

    John Deere 60

    Points set and sanded clean and dry and still no spark coming out of distributor
  2. E

    John Deere 60

    John Deere 60 wont start and traced down the power is good all the way to the points but then nothing to the plugs so ordered a new cap today dust shield rotor button spark plug wires and spark plugs is t(ere anything else I Am missing to get thsnks for any input its 12 volt positive ground...
  3. E

    John deere 60 wiring

    got it and figured out thanks so much
  4. E

    John deere 60 wiring

    how is coil wired .??
  5. E

    John deere 60 wiring

    I need help with a easy wiring diagram for a 1954 John deere 60 12 volt positive ground with generator voltage regulator distrubator coil and amm meter no ignition switch thanks for any help available
  6. E

    1950 John Deere model g not starting

    Ok thanks the bar is very tight in place with the 2 screws and straps it s just the coil wiggles on the bar as the piece of spring metal which comes on the bar is missing I tried to video it but I m. We at this and lost on what to do thanks
  7. E

    1950 John Deere model g not starting

    So if the spring piece of metal riveted to the bar missing that goes inside coil doesn t materialize if it s not there causing the coil to be loose
  8. E

    1950 John Deere model g not starting

    The metal bar that runs through the coil is missing the spring piece of metal that keeps it tight inside This post was edited by Ernie000 on 02/14/2023 at 04:58 pm.
  9. E

    1950 John Deere model g not starting

    Question for someone on a wico x magneto should there be a lot of slack and play on the metal bar that goes thru the coil This post was edited by Ernie000 on 02/14/2023 at 04:41 pm.
  10. E

    1950 John Deere model g not starting

    I dropped starter off at electrical shop this morning working on carb next
  11. E

    1950 John Deere model g not starting

    I have a 1950 John Deere g 12 volt positive ground new battery but tractor just drags when turned over and barley cranks. Is this a starter problem as it’s been tuned up in wico magneto. Also when it does crank it idles erratic and when given gas it runs rough This post was edited by Ernie000...
  12. E

    John Deere b and h issues

    I bought 2 old tractors my wife said were beyond repair one was a b and also a h. I started on the h first and the back 2 rims were rotted so I posted looking for h wheels on the site and that afternoon I got a call from Rick Cohn in Arkansas and said he had 2,well I bought them and all went...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top