(800) 853-2651
SHOP NOW

Recent content by F2036

Yesterday's Tractor Forums
  1. J

    What kind of engine

    We bought an 80s model skytrak and we are trying to figure out what engine it has. The sticker on the valve cover is missing. I have some pictures of some stamped part numbers and what I believe the serial number may be. We do know that it is a Ford four-cylinder diesel. Let me try again to...
  2. Bob N.Y.

    MF 35 HELP

    I have a Massey 35, 2 stage clutch, no Multi-Power. I need to replace the transmission input shaft seals. I have I&T repair manuals. The manuals say in order to pull the input shaft assembly out, the front part of the lower shaft has to be pulled to allow the PTO driven gear to drop down so that...
  3. 3

    640 Clutch

    I have recently added to my classic ford group a 640. The clutch will just barely disengage with the pedal all the way down. And when raising it only a couple of inches the clutch is fully engaged. So I believe I am in need of a new clutch. This will be a new venture for me, so is there...
    • 3N
    • Post #1
    • Forum: Ford
  4. T

    NAA battery box

    I'm sure someone will get a good laugh, but for me nothing ventured, nothing gained. Anyone have a good condition original battery box for the NAA. It may be that other models used the same. A few years back I bought a aftermarket one, of course missing the captive nuts and hold down bracket...
  5. J

    Mower gearbox

    Twisted off the shaft to my gearbox while mowing this morning. I'm looking for some pointers or leads about a repair. I see gearboxes for sale at reasonable prices, but none match this gearbox. This one seems to have different input and output shafts than the replacements I have found...
  6. 5

    ANTIQUE AND FARM TYPE SMALLER CLASSES,

    any pulls this Wed.
  7. D

    Track light trouble

    Got a track light that won't light .Have power to the feed piece but when it is plugged in no power to track itself. All matching type H track light .Should plug straight in and work.
  8. F

    Ford 201 injector pump timing

    Got a basket case motor at auction. Rotary injector pump has no marks under the side cover for timing purposes. Ford shop manual says timing can only be changed internally by pump tech; and if the pump is removed to mark the position so the pump can be replaced in the same position. They make no...
  9. C

    CS Bell corn sheller

    Anybody ever heard of these shellers. I've acquired a small belt driven model. Its a metal machine. Sorry I don't have a picture. I tried to google it and it showed several hand shellers but not a belt driven one. I got one from my neighbor this weekend. Hasn't run in over 20 years. I had to...
  10. T

    53 Ford Jubilee Thermostat?

    I had to replace the head gasket in my jubilee. While doing that I drained the block using the drain hole on the side of the engine. Part of the gasket set was the new thermostat gasket, so I removed the old one, cleaned up the housing and then replaced. After getting everything back together...
  11. rockyridgefarm

    Windrowing rye

    Dunno if it was a good idea, but I cut my rye. Weather guessers are predicting rain all next and we have had 4 inches in the past three days. Last year the rye got rained on 3 time and laid three weeks before I got it picked up. Tom is gonna come over and run my combine..;
  12. T

    And so it begins........

    The weather has cooled off some here so I thought I'd take the opportunity to start on the 961. Took the tires off and loaded them up. One tube is leaking calcium chloride so I'm going to have both tubes replaced minus the CC. Never replaced tubes before. Getting them both done and CC disposed...
  13. C

    1987 John-Deere 850 Crank Shaft

    New to this forum. Im in need of a crank shaft or a complete engine for my JD 850. My engine serial number is CH3043D218794. Any help would be appreciated.
  14. Janicholson

    my mom's first

    71 today. Not degrees. Jim
  15. T

    What year is my MH30?

    Restoring a Massey-Harris 30. Data plate on the frame is gone. Trying to determine the year of mfg. Plate on engine reads MFB162G-63(3)07 The (3) is very worn and is either a 3, 8 or 2. Looks more 3 to me but could be wrong. Thanks for any help!
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top