Recent content by Farmall706guy

  1. F

    Loading tractor tyres with fluid.

    I guess, one other option i could do is since its the beginning of summer, i can just fill the tires with water, then, like around when fall when things slow down and the lows start dropping into the 30's, i take the water back out and air them back up... maybe that would be an okay option??
  2. F

    706 TA

    Thank you, and the truth must be told you know just like as you said. thanks for all of your help people.
  3. F

    Loading tractor tyres with fluid.

    Thanks guys, so, how many 50 lb bags of salt would you say i would need to mix in with the 110 gallons of water? sorry i do not know math very well.
  4. F

    Loading tractor tyres with fluid.

    Let me rephrase something, I found out that it will only cost me 100$ to load both tires with 300 Lb's of salt, but thats corrosive, ill do it, but can i get away with only putting like 50 Lb's in each tire with 110 gallons of water to prevent freezing? I want as little salt as possible. thanks...
  5. F

    Loading tractor tyres with fluid.

    I wanted to add weight to my tires for along time. I understand that water doesn't weigh nearly as much as sodium chloride mixed in, but when i have 110 gallons of water to put in a tyre, with water being at 7-8 Lb's a gallon, thats 770 - 880 Lb's per tyre, thats quite a bit of weight. mixing a...
  6. F

    706 TA

    Im not using the TA to slow down like people think, i only used the ta to slow down at the end of the row to turn around so i don't loose my air pressure in the planter. I'm on all flat ground, with the planter still in the ground putting a load on the tractor is when i pull the ta, then i lift...
  7. F

    706 TA

    Hello all, 706, Farmall, I planted about 200 acres of beans with it, TA works good, I slide it backwards (quickly) to ta mode at the end of each row and it always shifts to low range like it should, never misses once. I just curious because when i slide it forward into high side to speed up on...
  8. F

    Farmall 966 Clutch?

    I forgot to say, I also adjusted the trans brake and mcv dump to proper specifications.
  9. F

    Farmall 966 Clutch?

    Farmall 966, 5 year old clutch, needed adjustment bad, So i adjusted it, gave it a half inch of freeplay at the floor board to where you can jiggle it with your fingers. when i start place my foot on the pedal and apply just a tiny amount of pressure on it, (not even enough to push it down), i...
  10. F

    Farmall 706 transmission brake adjustment?

    Okay, thanks! thats all i wasn't sure about! I just didn't know where the clutch position should have been. now that i know that it needs to be pinned down, and have the linkage loose, then tighten it a turn and a half, I can quickly easily adjust it. Thanks!
  11. F

    Farmall 706 transmission brake adjustment?

    Okay! thank you very much for the advice! I guess i can say that the Transmission brake is a must for loader work then!
  12. F

    What is a Cub cadet 105 worth?

    How much should i pay for a good running cub cadet 105? everything works, its got a new cylinder head and gasket, and it has been repainted it looks good. has decal kit too.
  13. F

    A REAL tractor pull second try...

    ahahahahahaa that is a good one.
  14. F

    Farmall 706 transmission brake adjustment?

    I have my TA and clutch all adjusted, i can't remember exactly how to do the trans brake again.... when the clutch is all the way up, the linkage to the transbreak is tight. when i press the clutch half way down, the trans brake linkages are all loose, when i press it the rest of the way down...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top