Recent content by Farmer1

  1. F

    2130 Hyd. Failure

    Thanks that was the trouble. Out of curiousity, isn't the oil supposed flow from the transmission through the bottom of oil cooler out the top and into the storage tank about air cleaner? I was sure that was the direction my 1830 flowed. Anyway thanks for you help.
  2. F

    2130 Hyd. Failure

    My 2130 tractor made noise when I started it this morning and I have no Hyd. and no steering, rockshaft,ect.. It worked great yesterday and for the last year that I have had it. I looped supply lines uder shift cover to bypass pto and shift cover and had lots of oil flow. I removed hose at top...
  3. F

    R Deere

    I have had this happen only is was the water getting into my oil. If it was like mine, it still had the orginal antifreeze in it and it ate through the head gasket and even into the head a bit. There was a water gallery about an 3/4 or an inch away from the piston. I used jb weld to fill the...
  4. F

    jd145 loader and 146

    I have a 145 loader on a 1830 and a 146 on a 2130. I was wondering if the 145 would fit on the 2130. They look the same. I would like to switch them because the 146 is worn out. Any help is greatly appreciated.
  5. F

    1830 jd Hydraulic

    I was wondering where the divert valve would be located? I hooked my flowmeter at output of oil storage tank to input gauge and output gauge to top of oil cooler is this the most accurate place to check?
  6. F

    1830 jd Hydraulic

    Where would this plug be? Before I had this tractor worked on I did have problems with the loader valves sticking on and sometimes would quit altogether and I would have to shut off tractor and move all remotes and loader levers and it seemed to snap it out of it once I started it. But that...
  7. F

    1830 jd Hydraulic

    Thanks for the info. I have a flow meter and will try what you say. Shall I put a pressure gauge in at oil cooler to test it while I am metering loader or does oil need to flow back to tractor. It will be a few days before I can try this. It is -30 here for the next couple days. Also how is the...
  8. F

    1830 jd Hydraulic

    The Loader is 145 jd. I'm not sure what you mean by what valve, but it has the two pull levers and a third mounted seperate for grapple hook. The loader is plumbed from valves to a tee at filter which also goes back to remotes and the other is at a fitting just below flow control valve. I don't...
  9. F

    1830 jd Hydraulic

    The problem with the tractor is that the front end loader is slow and chatters some. Everything else works. The one thing I had to fight with was bleeding brakes. It took forever before they would finally bleed. They return and hold pressure when pushed though. There is I whining noise sometimes...
  10. F

    1830 jd Hydraulic

    Is there anything to the relief valve. I pulled it out ad there is a spring and a ball both look okay. What is the divert valve. There is a flow control valve I think they call it that is beside hyd. filter that hooks to line coming from front. it was replaced I haven't rechcked it though. I...
  11. F

    1830 jd Hydraulic

    Looking for some help with recently overhauled hydraulics by dealer on 1830. New transmission pump and main pump. I am trying to diagnose myself and here is what I have come up with. I have 3.75- 4 gpm from transmission pump taken at oil cooler @ 100psi or 125 psi restricted. I have tried...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top