Recent content by farmeracb

  1. F

    Gas tank inside coating.

    No. Farmall tanks are hard to clean, and harder to coat. Any liner I have had experience with has had a failure at one point or another and then the tank is junk. You are time and money ahead to let the fuel do the cleaning, install a standpipe in the tank and a filter in the sediment bowl...
  2. F

    Fuel Pump

    Based on your picture and the roosa master pump, I would guess the machine has set a while and the pump internal linkages are gummed up, 'specially the metering valve. Pull the top off and you will see, 3 small screws and nothing is going to jump out at you. once you have it off move your...
  3. F

    Farmall M - I can't find a oil filter - HELP!

    I have the same thing on an F-20, it is a "luber-finer" Seems like the filter number I came up with was for an old mack truck with a gas engine. It should say on lid what the brand is. Have you pulled the element out to check for part numbers?
  4. F

    TD 6 Gas Engine will not start

    Just a note on this for what it is worth. 1/4 inch gap on the spark plug for a mag should = a fat BLUE spark. Almost white. I have fought tractors and equipment for days that had "spark" Once combustion pressure is in the mix, ie spark plug back in the cylinder, an orange spark will not cut it...
  5. F

    Lightening stained wood

    Stan, My comment is going to be a lot more aggressive than others have said, so use at your discretion. I have "aged" wood for many horsedrawn implement restorations using either ground walnut hulls (less aggressive), or black beauty (way more aggressive) in the sanblaster. It will remove some...
  6. F

    T14 Crawler Questions

    I agree with you on all fronts. I also looked through the tractor tests and found nothing. Odd. We are having a discussion on RP about the ring gear possibly different, which is a part i will need. Does your parts book show the ring gear (Bevel gear)as a different part for the T14 opposed to...
  7. F

    T14 Crawler Questions

    Just general questions about the engine, if they were used in anything else, how much fuel they will use, what machines undercarriage parts might work from, etc. Really just hope someone will chime in that has ever seen one, or better yet has one :) I have posted on RP also.. I am...
  8. F

    T14 Crawler Questions

    Posted over in the crawler forum, just a note here in case anyone with info might not visit that side on a regular basis. Let me know if you have any ideas. Adam
  9. F

    IH T14 Crawler

    I posted over on RP yesterday, but still looking if anyone has any info on the T14 IH crawler. I stumbled upon one while looking to purchase a td14, and though it might be a fun project as they seem to be low production. Is there any info anywhere about the engine? With a C461, does anyone know...
  10. F

    Bean Head for 303

    I would like to try to put together something different for my 303 this year. The 13 foot head that is on it now is too big really, and I have worked and worked and worked on it trying to get the vibrations out of the HC cutterbar. Its bad enough that I cant keep the pitman drive put...
  11. F

    784 brakes dragging

    Jim I looked at all the info you provided, thank you. It will help. Right now the problem is just rolling the tractor around without the engine running. So I am not sure that the hydraulic pressure is something to do with it, but very well could be not releasing the pressure from the brake...
  12. F

    686 Steering Line routing

    Thank You John! Yes that helps. Other than figuring out how in the world mine got where they did! Thanks Again, Adam
  13. F

    686 Steering Line routing

    Would anyone be able to provide a picture of how the steering lines are routed from the fuel tank to the side of the radiator?? My lines got bent up at some point in the things life and while I have the radiator out I would like to get them straightened back up so they aren't hangin out from...
  14. F

    784 brakes dragging

    Need a little advice with my 784. I bought this thing with a bad clutch. easy enough, but when I was splitting the tractor, the rear end was terrible hard to roll away. Now I have dealt with 84 brakes not working well before, but never too good! SO I just wanted some input before I tear into...
  15. F

    gp timing with fairbanks fmj

    The tractor came to me on pallets and in boxes after the person before did piston rings and gave up. So I do not know its condition other than the checks I have done. I have had the manifold off and checked for that problem, I have done compression checks which come up about 70 which in...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top