Recent content by firsttime

  1. F

    Steering wobble

    That is one thing I did not check, I do know the tires are not well balanced. Thanks.
  2. F

    Steering wobble

    This is where I'm not certain. It moves at least some, I think. At worst it translates to the steering wheel, at one point almost tearing it loose from my grip. In any case when it starts to wobble I can feel it in the steering wheel.
  3. F

    Steering wobble

    I have a 1973 4000 (gas w/power steering) with a wicked steering wobble at high speed. Everything is tight. It moves from the steering arm at the steering box. I can't find a good diagram of the parts breakdown with part numbers. My diagrams are also not detailed enough to allow directions for...
  4. F

    Drawbar 411B

    Yes, that might help. That's the thing I forgot to measure. Thanks
  5. F

    Drawbar 411B

    Thanks for the model numbers. I can expand the search.
  6. F

    Drawbar 411B

    Hi folks. I'm looking for a drawbar for a 1958 411B. We have checked most salvage yards and while there are 411Bs, there are no drawbars. The Case part # is either G10620 or G14020. The manual gives both numbers. What other models used this drawbar? Does anyone have one? Located in NJ. Thank...
  7. F

    Help! Loader brackets

    Gonna need a loader to clean up this mess after the flash flood. I have a Ford 4000, and a Schwartz 1300/1400 loader. Problem is they have never been mated. Does anybody know where I can find the bracket(s)? I will check Wengers tomorrow.
  8. F

    411-B case-o-matic

    Thanks Chuck. I did as you suggested and came up with a couple more questions. Since the current aftermarket generators are 25 amp, I will assume his current one is also. So, a 12-15 amp regulator would seem to be what he is looking for. Positive or negative ground doen't seem to matter. But the...
  9. F

    411-B case-o-matic

    Son has a 411B. we are strugggling with the charging system (big suprise). It is 12V positive ground and the generator does charge. It is an autolite system (but generator and regulator are after market). Does the polarity of the system determine the choice of regulators? We cannot find a direct...
  10. F

    Do you remember the terms of your first tractor purchase

    1978 bought a 1941 Case SC from a second cousin who had it in a shed. Paid $50 for it. Stopped farming my 7 acres about 1980. Still have the Case. Fast forward to 2017, oldest son and I boought a barnful of equipment, Ford 4000 and 8N. Moved up, farming 10 acres now.
  11. F

    Another reason to be careful

    Case 411B. On closer inspection, it had been welded twice before and painted. This was a new break along side the old weld.
  12. F

    Another reason to be careful

    One in a million chance. Son was backing equipment into the barn. Needed to stop and pushed the clutch in. Clutch pedal snapped off and tractor tried to push two pieces of equipment out through the wall of the barn. Fortunately, no one was close by. Be careful!!! This stuff never forgives a mistake.
  13. F

    NH 271 baler

    Thanks for the speedy replies. Yes, I have parts to go get from Esch Equipment, but he still wants $85 or so for a knife arm. All I really need is the blade and the roller. I will check the 280 series, thanks.
  14. F

    NH 271 baler

    Hi all! I need new knife arms for our 271 baler. I would prefer to rebuild the ones I have. Is there a part number for the brass roller? I can't find it on Messicks. Thanks.
  15. F

    411-B case-o-matic

    Thank you, John. I was hoping you would be among the repies.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top