Recent content by Frances

  1. W

    670 Super Diesel Ampli-torc problems

    I went to use our 670 super diesel yesterday to spread a load of manure and it acted completely normal.I parked the tractor for an hour or so and went back to use it, and the two speed AT would not engage the high side. When I push the lever forward it will just stay in the low side. last night...
  2. R

    liftarm nut removal

    lift arm has came off of the swivel ball. the pin spins in the tractor
  3. L

    oil pump on model M

    How do you time the oil pump on a model M
  4. U

    Sparkplug Factory in China- You gotta see this place...

    Just had to snitch this from the A-C page and repost it here in hopes that everyone will see this. State Of the art in Mainland China
  5. L

    JD E's

    Putting this set of JD E"s away for the winter.
  6. B

    over filled tractor differential - 80w-90 salvage ?

    So the drain plugs have been out while I have been working on this 850, cleaned the compartments out and so on, while refilling the rear end, I loosened the oil level plug, almost to the last thread, and while filling, nothing leaked, whoa, put a clean pan under that pug and pulled it, probably...
  7. 1

    foamy transmission oil

    Took the A out for a 20 mile tractor ride this weekend. The next day, there was a small puddle of transmission oil on the shop floor. There were also streaks under the platform that showed where it had ran down over the front of the axles. When I checked the rear end oil, it was all foamy. (It...
  8. B

    8n clutch grinding gears

    I recently bought a 1950 8n that runs great but when you start it cold (80degree day) it shifts perfectly but as it warms up to operating temp it will shift fine in between gears but if you put it in neutral and let the clutch out and then put the clutch back down it will not go into any gear...
  9. R

    powerblock in 39 b

    Will the 5-1 powerblock fit in a 39 B? I know they were intended for the 41"s but what is the difference? I know i"ll have to use the 41 style head, how hard is it to put the pressurized oiling system in the older b"s? I have a 41 parts tractor that should have everything i need but he rear end...
  10. F

    3400 ford tractor hydraulic lift problem

    I have a Ford 3400 tractor that I have a hydraulic lift problem with.Sometimes when I use the mower or rototiller the lift will work fine then sometimes the lift won"t lift at all.Is there a easy fix I can repair myself without spending a ton of money at a Ford dealer.Oil level is full!
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top