Recent content by Fred da Farmer

  1. F

    Allis 8010 hydraulic noise

    Here are videos, hopefully you can hear the vibrating hum.
  2. F

    Allis 8010 hydraulic noise

    Hi, I have a question about what you said; check the standby and main relief pressure at the tee fitting by the PTO valve. Could you describe this location and what to adjust? Thanks.
  3. F

    Allis 8010 hydraulic noise

    Thank for that info to know where to start, taking off the step and behind the batteries. (the tractor does have an auxiliary fuel tank). With the tractor running, I felt the hoses by the canister hydraulic filter on the right side (not the belly filter), and these are vibrating with no load...
  4. F

    Allis 8010 hydraulic noise

    I recently, bought an 8010 AC one owner, with low hours, The tractor has a loud sound like a pressure relief valve is humming, all the time. The only time the loud noise will stop is when I raise the 3-point lever, and then the noise starts again, immediately when the arms are in raised...
  5. F

    170 category 2 to category 1

    Most tractor dealers would have a bushing kit for CAT II to CAT I which is a set of bushings that has inside diameter (id) of Cat I and an outside diamter(od)of Cat II. Use the CAT I hitch pins and slide the bushings into the CAT II sleeve. This is for all tractors. CAT I Top Link Pins are...
  6. F

    Hay prices vs corn prices

    Here are some web links to help you start. There are many variables to balance then compare to price. I would recommend to test the forage analisis for it's nutrient values form the state university or a private lab. Try to keep the values on a Dry Matter Basis(DM). Generally solve for the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top