Recent content by fredfarkle

  1. F

    H60E transmission problems

    It has been a while, but here is the latest update. First, the picture of the pressures I posted earlier is incorrect. The labels in the manual which shows the location of the pressure taps are incorrect. We recorded some new pressures last week. We only had one pressure gage again. All...
  2. F

    H60E transmission problems

    We were not blocking the oil passages while machine was running. we did the test with air while the control valve was off the machine
  3. F

    H60E transmission problems

    the clutch pack pressures posted are the only ones we took. there are two charge pumps. One supplies lube oil to one of the clutch packs. the other charge pump pumps all oil through the oil filter. it then splits to a back pressure regulator, which maintains the 270-300 psi, and the other...
  4. F

    H60E transmission problems

    part 3 of recap. it wouldn't let me post until I broke it down 9. To verify we had put he control valve back together properly, we removed it from the machine and replaced the scheduling valve with a piece of wood with a gasket. Since the 5 operating holes in the control valve go up and...
  5. F

    H60E transmission problems

    part 2 of recap . Reinstalled the new accumulator spring- no change. Read the pressure at the scheduling valve supply. Pressure was 250 in neutral, and dropped to about 180 when a gear was selected, but returned to approximately 250. Machine would still not run 5. Read pressure in...
  6. F

    H60E transmission problems

    here is the recap of what all we have done. Recap of work on the H60 payloader 1. Found the transmission filter installed incorrectly so that it bypassed and was the wrong filter. The spring was not installed on the bottom to keep the cartridge tight against the top. Installed it as...
  7. F

    H60E transmission problems

    2nd try on the photo
  8. F

    H60E transmission problems

    I know the clutch pressure display is a mess. I tried to paste an excel chart and I couldn't properly. I then tried to set it up as a chart in the box, but when I previewed it, it was ran together.
  9. F

    H60E transmission problems

    New Poster Here. I am Elanier81's brother and have been working with him on the H60 payloader. Following are some clutch pack pressures. Although these are in a chart, they were taking with only one pressure gage, so all readings are actually one at a time. Also, I did not get all gear...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top