Recent content by fusion

  1. F

    8n won't start - Need ideas

    I have posted this story a few other times Several years ago, my 52 8N would not start it would sometimes try but would not I called a old timer tractor guy to help me, he stood there for a few minutes as I turned it over he looked at me and said your exhaust is plugged here mice had filled the...
  2. F

    Z134 No Compression in Cylinder #2

    Pull the head
  3. F

    8n dies when jumper cables are removed

    We see that here at my Ford Dealership sometimes the battery may have a internal short try a diff battery how old is the battery
  4. F

    new gas tank: TO SEAL, OR NOT TO SEAL

    How old are you How long did the old tank last let the next owner worry about it ..
  5. F

    Seal All - Pin Hole

    A small metal screw and a fiber washer inserted into the hole don't over tighten worked good on my TO-30
  6. F

    fuel tank

    I would check with your Insurance carrier make sure you are covered for storage of fuel in larger container
  7. F

    Engine oil

    I use str8 30 W in all my older stuff
  8. F

    oil price drops below zero

    I agree with 504 I am old enough that I have seen this game before these low prices now with come back and kick us in the butt. I think our President is on the right track with what he has in mind to play this game. In the mean time if you have the storage capability buy diesel and store it .
  9. F

    Right hydraulic oil questions

    Check with Tractor Supply I use there Traveller products they have a Universal Fluid and also so one for Fords. prices are good
  10. F

    Follow up 80-90 w limited slip

    Ford Mororcraft sells a Additive Friction Modifier for Limited Slip Rear ends We sell a lot of it here at my Ford Dealership 1-2 bottles in a standard size differential using 80-90 gear oil . works well . Part number XL-3
  11. F

    TEA 20 three point does not hold a constant height

    I was having the same concern with my Ferguson TO-30 I installed a Zane Thang, works great I can set my controls where I want it and it stays right there.
  12. F

    TEA 20 three point does not hold a constant height

    I was having the same concern with my Ferguson TO-30 I installed a Zane Thang, works great I can set my controls where I want it and it stays right there
  13. F

    Remember

    We need all to remember in the coming days Tough Times Don't Last , Tough People Do
  14. F

    Scrap price

    $ 80.00 here in Pennsylvania as of last week
  15. F

    Looking for 1952 Ferguson TO30 engine block

    Place in Pennsylvania called Wengers shows one
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top