Recent content by GaryH530

  1. G

    Looking for a replacement Tilt hydraulic cylinder for a 480C

    Thanks for the reply and for the info. The tractor is located at my cabin about 140 miles , away from where I live Burbank, CA. I will have to track down a machine shop locally who can handle that sort of job. And I'll check out PartsASAP , and see what they have to offer and pricing. I...
  2. G

    Looking for a replacement Tilt hydraulic cylinder for a 480C

    Greetings gents. I'm looking for a replacement bucket tilt hydraulic cylinder for a 480C . They seemed to be as rare as hens teeth. I was replacing the seals on the week-end and found that the rod has surface damage. So I need a new rod or replace the hydraulic cylinder completely. Is there...
  3. G

    4500 Loader Bucket Tilt Hydraulic Cylinder Seal Kit

    Thank-you for the advice, and your thoughts on the matter. Because of the time & distance of where the tractor is. ( about 200 miles away ) I'll remove the Bucket Tilt Hydraulic Cylinder's and bring them back, and work on them. As far as I can tell, they looked like they haven't been...
  4. G

    4500 Loader Bucket Tilt Hydraulic Cylinder Seal Kit

    Thank-you for the help. With the information, I can check the dimensions of the seals in the kits,[i:9746348df9] ( 740 loader seals 309959 or 309959F. )[/i:9746348df9] and check the next time that I'm at the tractor. I was probably searching for the tractor, rather then the 740 loader. I...
  5. G

    4500 Loader Bucket Tilt Hydraulic Cylinder Seal Kit

    Greetings all, Can anyone direct me to a vendor who would sell a Seal kit for a Loader Bucket Tilt Hydraulic Cylinder on my Ford Industrial 4500. I believe is a 1967 model. The tractor is at my cabin which is about 200 miles away. And it will be a few weeks before I'll be heading back. I...
  6. G

    Replacing a radiator on a Ford 4500 Industrial.

    Greetings to all. And I hope you have a Great Thanksgiving. I have to pull out the radiator on a 4500 Industrial so it can be repaired. Is there any tips and or tricks on pulling one out ? I've owned it for about two days, so not much experience. I've ordered a service manual, but I would...
  7. G

    Case 530CK 1968-69 Model

    Thank-you for your thoughts. Good luck on the rebuild of your engine. Colorado is a nice place. I spend some time there, 30 odd years ago. I hope you get to build your cabin. Have a good one.
  8. G

    Case 530CK 1968-69 Model

    Thanks for the advice, DIM I'll checkout the GC 1723. Thanks for this suggestion DR. EVIL One suggestion, no matter WHAT you buy, do NOT LET IT SET UNPROTECTED OUTSIDE IN THE WEATHER. That's the hardest thing on equipment. One other thing that I thought of. My cabin is at about a...
  9. G

    Case 530CK 1968-69 Model

    Thanks Steve. Most things I'm handy enough for. And I know enough, to know, when I don't know enough. :-) Thank-you for the advice.
  10. G

    Case 530CK 1968-69 Model

    Well......I was looking for some wisdom, and I believe I've read it. Thank-you for taking the time to respond, you have helped me with my decission.
  11. G

    Case 530CK 1968-69 Model

    And yes, you're " right" it is a beefy beast. Sorry missed a word. Gary
  12. G

    Case 530CK 1968-69 Model

    Thanks for the quick response. I'm actually searching around what you suggested. And yes, you're it is a beefy beast. I can tow about 7000lbs , so something a little lighter, would be a better choice. Thank-you.
  13. G

    Case 530CK 1968-69 Model

    Greetings all, I need a tractor for my off grid cabin, general use maintaining the 1/2 mile dirt road, doing a bit of digging and moving dirt around. Some heavy lifting, prep'n ground for a few small buildings. The cabin about 70 miles from a town for parts. And about $1K to move to to...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top