-
Ggbsmith replied to the thread MF 175 diesel.have a look at this from a previous thread it is for the 175 diesel like yours
-
-
Ggbsmith replied to the thread My rebuilt Perkins won't start.persistence pays off, i done the same many a time until i would figure out what was causing the problem, instead of loading the parts...
-
Ggbsmith replied to the thread New to me MF150.When you get the steering box tightened up, check the turnbuckle and pins for wear a small amount causes problems with the power...
-
Ggbsmith replied to the thread Replaced Steering Cylinders...bled...not working MF 245.you have a hose hooked up wrong causing the cylinders to dead head, double check your connections the rod end of one cylinder connects...
-
Ggbsmith replied to the thread Charging issue.that is most likely what happened BTDT, most of the time it will force the gauge to far toward charge and hang it up
-
Ggbsmith replied to the thread FEL Hydraulic issue.from the pictures it appears you are using the tractor remote levers to control the loader, with only one direction causing the dent to...
-
Ggbsmith replied to the thread 175-178 power steering problems.from what you describe it is the one that uses a control linkage from the steering rod yoke to the steering control valve, if so any...
-
Ggbsmith replied to the thread My rebuilt Perkins won't start.just curious as to why they quit using the snap ring to letter timing method, in doing that would there be any need for the flywheel...
-
Ggbsmith replied to the thread My rebuilt Perkins won't start.did you remove the snap ring in located behind the timing window when you tore the pump down?
-
Ggbsmith replied to the thread Power steering Farmall super C.google search electric power steering on a farmall m you should be able to find some videos on how to install a used electric unit from...
-
Ggbsmith replied to the thread My rebuilt Perkins won't start.if you lined up the timing marks on the gear train correctly don't worry about the pump being 180 out it can't happen due to the...
-
Ggbsmith replied to the thread MF 50 Hydraulics not working.what i meant was to remove the hose connected to the lift cover marked as NO and connect to the fitting marked 1B as marked in Jim.ME's...
-
Ggbsmith replied to the thread Mustang Generator Help.don't know how the thumbs up got there
-
Ggbsmith replied to the thread MF 50 Hydraulics not working.if your cylinder is dual action being the left side has a handle hook the hose going to the lift cover to the other fitting on that side...
-
Ggbsmith replied to the thread Mustang Generator Help.have a look at his pdf file rosesclassyquilts.com https://www.rosesclassyquilts.com › EquipmentList2 it has a list of generator...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy