Recent content by GregP

  1. G

    IH FARMALL 240 hydraulics

    I’ve replaced the short return line hose and O rings on both ends plus gaskets on the pump , the metal lines are in great shape that’s why I was wondering about the pump . I could send you a picture of the system I have if you don’t have it
  2. G

    IH FARMALL 240 hydraulics

    Would this be just the return line from the pump to the distribution block or in addition the lines from the distribution block to the cylinder
  3. G

    IH FARMALL 240 - 1959

    It will do this with no implement attached, and even with it never labors , as long as it has fluid it’s very strong and doesn’t get hot, it actually will do before it’s even warmed up
  4. G

    IH FARMALL 240 hydraulics

    I’m having aeration problems with the hydraulics , forcing fluid out of the vent tube under pressure. The system works fine until it forces all the fluid out . I’ve gone through as much as I can looking for a low side leak , distribution block o rings , pump and low side return hose , checked...
  5. G

    IH FARMALL 240 - 1959

    Anyone had any experience with hydraulics on this tractor? The tractor has started aerating the hydraulic fluid. I use hy trans , I’ve been through the distribution block o rings , pump and low pressure return line. The lift pressure is great as long as there’s fluid . It’s forcing fluid out of...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top