(800) 853-2651
SHOP NOW

Recent content by gus1

Yesterday's Tractor Forums
  1. G

    New Holland 271 Tine Bar issue

    Thanks for your feedback, I should have done your recommendation. I ended up taking it to a New Holland Dealer to put the spring in it and they took it upon themselves to replace every bushing and bearing on the thing, Tine Bar repair cost me more than the baler. And its not working right with...
  2. G

    cutditioner

    I have to sharpen my New Idea 272 every 10 acres or so or the cut looks bad.. I just crawl under and use a 4" angle grinder, it takes about 20-30 minutes, but the cut is nice and it makes good hay. I cut about 50 acres a year, biggest complaint is the walking speed I have to cut at. Takes a long...
  3. G

    New Holland 271 Tine Bar issue

    Hi, I have a broken pin inside the tine bar that connects the bar to the rod connected to the chain... The Tine bar holds the feeder tines that push the hay into the chamber... I took the Tine bar off luckily didn't kill myself when the spring popped out. I can get the new pin, but...
  4. G

    IH240 Chassis seals

    Thanks everyone for the great info.. should have the brake and Brake pivot shaft seals done today, then its onto the PTO seal... Picked this IH 240 Utility tractor up at an auction this spring, not pretty as the SuperC, but runs good, has a fasthitch and a pair of remotes, and fairly new...
  5. G

    IH240 Chassis seals

    Thanks for the input.. I am replacing these seals though they do not appear to be leaking, I just thought that was part of the gear box and since I had it drained, went ahead with these seals.. though now it appears to be unnecessary, I learn something new everyday. The seals were installed...
  6. G

    IH240 Chassis seals

    Thanks for the information, Yes I passed on the Super C and now own this IH 240 Utility... at least this one runs, leaks gear fluid into the brakes and then out the the PTO. I figured I would just do these shaft seals while I am at it. I wasn;t sure if they leaked or not but while I had the...
  7. G

    IH240 Chassis seals

    I am replacing seals on my IH 240. Its leaking gear lube.. On the brake/Clutch pedal shaft, Can I pull this out completely? Also I assume the metal side of the seal should be outward (the seal that I took out appeared to be in backwards).
  8. G

    Super C precheckout failure

    I hear you. He did mention compression test was ~150 on all cyls. I will be patient for a runner, a lot of junk out there and I don't have the time, knowledge, or money to spend on fixing junk. I can stand to do maintenance and fix a few things, but this one sounds like a hole that could get...
  9. G

    Super C precheckout failure

    Hi, first post here, I am looking to buy a WFE Super C for some light duty hay raking (40-50 acres) and came across one locally that has some issues. During a test drive, once it warmed up the engine was running rough (like not on all cylinders) and totally lacked power. Owner said he cant...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top