Recent content by hellpig

  1. H

    Chainsaw issue

    Thanks. What gets me is, it will scream to fill rpm on a cold start, but after a couple minutes, will not go past half. Even if I push primer bulb a little. Or shut off and restart. Which makes me think maybe coil? Won't get a chance to fool.with it sgain for a few days. Thanks to all.
  2. H

    Chainsaw issue

    Not yet, couldn't find my little splined driver
  3. H

    Chainsaw issue

    New plug didn't do it. Same as before, screams for 2-3 minutes or so, then won't go past 1/2 throttle. Choke partially on same. Bulb stays full, slight push doesn't help, so thinking not fuel issue. May try to find some Husky fuel line ( have had issues with generic line in other Huskies)...
  4. H

    Chainsaw issue

    Mixed fresh fuel, and added seafoam, let it idle10 or 15 min. Rain it some more today, still dead past 1/2 throttle. What confuses me is cold start, it's all scream for a few seconds, then lay down. Thought maybe a week coil, but revs fine when first started.
  5. H

    Chainsaw issue

    Husky 445, has always started 2nd pull. Fired it up the other day, let it warm up a minute. Won't go past about 1/2 throttle, even if you ease or sneak up on it. Will idle without skipping a beat for 10 minutes, and beyond. Changed air filter, but it was clean. No carbon buildup in exhaust...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top