(800) 853-2651
SHOP NOW

Recent content by Hidude

Yesterday's Tractor Forums
  1. H

    Help identifying some lights

    Thanks. Ill try to look for his store and see if he could offer any more information.
  2. H

    Help identifying some lights

    Thanks Jim. Good thought but i don't think they were fogs because they are double sided amber with an 1156 bulb on each end. I thinking some type of marker but not sure from what
  3. H

    Help identifying some lights

    Hi everyone. While cleaning up my father's estate I found these lights in a bucket with 8n parts. I know they're not from the tractor but I think they're really cool. I'm guessing he collected them with the thought of using them on his tractor. Does anyone recognize what they're from? He was a...
  4. H

    Hydraulics maximum load

    my recently rebuilt pump with new piston and cylinder will easily lift my ballast box that is over 800lbs. I weighed each piece before it went in and scaled the box when i built it. I would suggest trouble shooting and fixing your tractor as the others suggested before i would modify an...
  5. H

    8n position control not working properly after hydro system rebuild

    hi jim. i put it in the title of the post as 8n position control. maybe i should add it to body of the post
  6. H

    8n position control not working properly after hydro system rebuild

    thanks for the reply jmor. ive read some of your other posts and was back and forth in my head between an adjustment problem or valve issue. im going to be replacing the pto shaft and im trying to make a repair plan before i do it. if any 1 else has any thoughts on this please post them. i tried...
  7. H

    8n position control not working properly after hydro system rebuild

    hi all. im trying to finish my 3 year 8n tractor overhaul. last problem im having is the arms will always lift to full height then drop back down to set position no matter what spot i set the quadrant lever to while in position control. for example if i pull the lever up 1/3 its lifts to full...
  8. H

    Transmission inspection

    Heres the part # from napa that I got. Similar to above...I used a little anaerobic sealer on the plug, tapped it in then set it with the female end of a 3/8 extension. Hitting the male end to flatten the plug a little. No pressure on it so it just needs to stay in place.
  9. H

    Transmission inspection

    My 8n leaked oil from the shift rail of the tranny and sherman combo after rebuild and switching to utf (red dye added) from gear oil. I had to go back and install the Welch plug and replace the combo top cover to stop the leaks. I had drive a 70 mile round trip to find the 75 cent plugs at...
  10. H

    8N Governor issue?

    I had a similar problem last year while rebuilding my tractor. Idle to full throttle in two clicks. After chasing the problem for a week on two tractors with 2 rebuilt carbs and opening up the governor several times I figured out the angle on the butterfly valve linkage ball was slightly...
  11. H

    Howard

    i dont know anything about them but it looks like this pic from the other ford website
  12. H

    Howard

    this might be the 1 he was linking to. about an hour away from me.
  13. H

    Howard

    https://www.facebook.com/marketplace/item/959143419108909/
  14. H

    Sherman combo shift rail oil leak questions.

    Hi all. I fixed my previous tranny shift rail leak with a 3/4 Welch plug. Ran the tractor and found oil leaking from the sherman shift rail directly below it. I have another cover that I believe is the "new" style that has longer rail slides that get capped with Welch plugs. Questions....#1 has...
  15. H

    8n shift rail leaking oil

    It's utf with red dye. I work at a golf course and ive learned to dye clear oils. Had a guy blow a hose on a greens mower 6 years ago and continued mowing until it pumped all the oil out. Cost thousands of dollars and took a few years for that grass to be fully healthy again. Said he didn't...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top