(800) 853-2651
SHOP NOW

Recent content by hunterdad

Yesterday's Tractor Forums
  1. H

    Ford 861 3 point won’t raise

    Replaced all oils in tractor coupe years back, and hitting the rear tires when I raised the cultivator too high happened this past October, no freezing temperatures. Just wondering if I damaged something internal to prevent 3 point not too lift, after shocking/jarring 3 point in raised position
  2. H

    Ford 861 3 point won’t raise

    I had a Dearborn field cultivator on back of my ford 861, I accidentally raise it too high while moving slowing forward , the cultivator frame hit the rear tires. It caused a slight shocking/ jarring the 3 point in raise position . I lowered the cultivator to prevent hitting rear tires again...
  3. H

    Ford 861 Water Temp Gauge Issue

    Replacing temperature gauge on my 961, wasnt sure it was reading correctly. I ran into same problem, nut tight but probe still loose. This temperature gauge doesnt include an aluminum washer to go over probe. I ordered another temperature probe from Steiner in Michigan,, this product...
  4. H

    Dearborn Implement restorers questions

    I restored about 12 Dearborn implements so far...I reuse the bolts...wire wheel,rust off....if bolts are bad,,I buy new I try to save ID plate...I've use magnifying glass to try to read wore number.....if not I buy my plates from George Bradish tracrtor parts.. You can buy letter or number...
  5. H

    Dearborn 14-4 Side Mounted Sickle Bar Mower Parts Help

    Email sent...Thanks
  6. H

    Dearborn 14-4 Side Mounted Sickle Bar Mower Parts Help

    I'm restoring a Dearborn 14-4 Side Mounted Sickle Bar Mower and need the following parts, as shown in the picture..even drawings with dimensions would be helpful. Thanks <image src="http://forums.yesterdaystractors.com/photos/mvphoto3820.jpg"/>
  7. S

    Got The John Deere B Running

    A friend at work said he had an old John Deere that his Grandfather bought new in 1952. He wanted me to get it running. I asked how long it had sat and he didn't know for sure, but his son is 15 and he had never had it going since his son was born. I went to look at it and I knew it would be a...
  8. S

    naa hydraulics

    the vane pump in my naa loses prime after sitting overnite. if i take the pressure line off of the pump and wait for the oil to come then shut off the tractor and hook the line back up it works perfect until it sits overnite, what is happening here. i replaced the o rings on both sides of both...
  9. C

    John Deere GP clutch question

    I am replacing the clutch dogs on my 1930 John Deere GP, The T bolts have a slight angle-bend to them. Is that suppose to be there or do I need to try to press them straight? I can't find any repros to replace them. Thanks! CDave
  10. H

    Cockshutt BlackHawk 115 RM Corn Planter Decals

    Where can I get original decals madeup of the CockShutt BlackHawk 115RM Corn Planter
  11. H

    Cockshutt BlackHawk 115RM Corn Planter Decals

    Like to know where I can get decals madeup like the original ones that were on a Cockshutt BlackHawk 115RM Corn planter
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top