(800) 853-2651
SHOP NOW

Recent content by huntpineycreek

Yesterday's Tractor Forums
  1. H

    Massey 1240 Console Problem

    I would check wiring first seems strange that the would work then not, that tells me its a wiring issue if I remember right we had one do the same thing you are explaining and it ended up being a wiring issue, they have a circuit board that the gauges attach to and I think that's where we found...
  2. H

    O compression on one cylinder Continantal Z134

    do a leak down test on it, they make a kit that puts air into the cylinder and it will tell you where you are loosing compression, the one I have puts 100psi in and you need to have that cylinder at top dead center then listen at the intake, exhaust and in the oil fill hole you should hear where...
  3. H

    MF front axle question

    did someone change out the front axle or spindles at some point? all the ones I see don't have an offset
  4. H

    MH 1455 4WD problem

    first thing I would do is take the cover off the 4X4 drive shaft and see if the snap rings have slipped off the drive shaft, they hold the 2 couplers on that join the drive shaft to the front axle and transmission, I have seen this more than once
  5. H

    Massey 481 keeps quitting

    I need some more information on this tractor, they made 2 different 481s does it have a manual lift pump or a electric pump the tierII had a electric pump,if it has the electric pump take the fuel cap off and listen in the tank you should hear fuel running in from the return off the injectors,if...
  6. H

    What are these?

    vacuum fuel pump
  7. H

    Blocker Heater for MF265

    I think its a 773320M1
  8. H

    No Oil Pressure

    I would put a gauge directly into the block and see what you are getting may save you some time trouble shooting it out
  9. H

    MF 50 Hour Maintenance

    warranty work is only manufacture defect it will not cover oils,filters or the labor to do the service, you can buy a package that covers filters and oil and labor
  10. H

    MF 50 Hour Maintenance

    what model is it? I can check and see what needs to be done for you, $800 could be high but it depends on what all is being changed,you can service it, it will not effect the warranty
  11. H

    1233 Massey Ferguson (lift problem)

    looks like there is an adjustment for it, look where the lever comes down it ties into another linkage bracket it should have a double nut on it tighten up the double nuts and it should hold if it wont it will need to be taken apart and the 2 friction discs will need to be replaced, look on...
  12. H

    JD 4650

    we flushed the system and topped off the oil after we replaced the cooler and ran the tractor and engine oil level dropped
  13. H

    JD 4650

    no coolant in the pan just oil in the coolant
  14. H

    JD 4650

    Hey all got a question, we got a JD 4650 and we are getting engine oil in the coolant, we have replaced the oil cooler thinking that was where we were getting the oil no luck still getting engine oil in coolant, we removed the head and checked the head gasket it looks good, we sent the head out...
  15. H

    Allis Chalmers B

    myself and some other guys are advising on a FFA project we are restoring a Allis Chalmers B and we need to know what Decal kit to order its a 1948 model year, I have looked on the web and it looks like we can get the lettering in black or blue, I don't know what color came with this tractor or...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top