Recent content by Iamarv

  1. I

    Farmall/International Super A Industrial

    The Industrial will have a 123 engine were the SA would have a 113 engine unless the SA is a very late model.
  2. I

    International model A1 or AI

    Updates: The block number is 356856 FAAM Chassis tag is 354898R2 Number by number 1 spark plug 354787 FAAM Cast codes 2Z No dipstick. Has foot throttle and heavy front axel. Also a water pump. I believe all SA Eyes were built the same. The big change came when the 123 engines were placed...
  3. I

    International model A1 or AI

    I may have a Super A I (eye) that does no conform to the above comments of a SAI. The chassis tag is on the seat bracket and it reads FAA -I and the tag serial number reads 354787 This would mean it is a early 1954 tractor. All cast codes on the tractor are Z cast codes. The block number...
  4. I

    A little advice for the wannabees LOL

    Excellent advice and in applies to many other situations when working together as a group.
  5. I

    Central Illinois YT Roundup

    We're heading your way. Marv
  6. I

    1370 (head problem or gasket) pushing water out of radiator

    I have an early 1370 and had the same promlems you are having. I bought it used and it kept blowing headgaskets and of course antifreeze in the oil. I pulled the sleeves out and found cavitation on the sleeves and on the block. New sleeves and JB weld on the block. Problen solved. Nope!! The...
  7. I

    756

    Check for antifreeze in the oil.
  8. I

    Anybody Going to the Galesburg, IL Tractor Show?

    I'll be there 'bout 9AM.
  9. I

    300 differential growl

    Zack, I wish you the best of luck on your project. I tried the same thing on a SM and the constant whine from the gears was more than I could tolerate. I had it apart and moved shims more time than I can remember. My solution was to replace the entire rearend of the tractor with a good rearend...
  10. I

    International 100 how can this be?

    We need more information. Read the block casting number under the front spark plug and report back to us. I suspect you have a Farmall 130.
  11. I

    Mt Pleasant Iowa feature tractor???

    The last I heard was that the featured items would be short line equipment. Everything except JD's. Farmall, Case etc.
  12. I

    200 block problems

    If I read your question correctly, You want to put the SC block in 200 and take the 200 engine componets (sleeve. piston etc) and put it in the SC block. I have never tried that but I do know that when ordering overhaul kits for the various 123 engines the correct block number does make a...
  13. I

    Latest purchase Farmall 200

    I posted earlier assuming water meant antifreeze. Sorry to alarm you. You must be in a warm climate judging by the green leaves on the trees. In Iowa all radiators has antifreeze in them.
  14. I

    Latest purchase Farmall 200

    Most likely the O ring around the sleeve is leaking and allowing antifreeze to get in the oil. Could be a leaking headgasket also. The real problem could be the damage caused by the antifreeze in the oil. It is VERY damaging to the lower engine parts. (crank, rod, and main bearings etc) Keep us...
  15. I

    Central Illinois YT Round Up - Update

    Sorry, I can't make it this year. Have fun.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top