Recent content by Ian_300U

  1. I

    300 Utility Engine Cylinder Rust

    Thanks for all the advice, one thing is mine has a loader and I have no good way to get that off the ground to move it back and forth at all, the best I can do is maybe an inch or two before the bucket stops it. What kind of work would I be looking at to remove the starter?
  2. I

    300 Utility Engine Cylinder Rust

    I have no definite answer as to how long it was sitting, but there was a decent sized tree blocking it in the shed it was parked in from what I was told.
  3. I

    300 Utility Engine Cylinder Rust

    I pulled the spark plugs from my 300 utility the other day and I found variying amount of rust and carbon build up. Is this something that I can fill the cylinders with something like evaporust or should I pull the head? Whenever I try to get it ti turn over, all it does is click and the fan...
  4. I

    International 300 Utility EngineHead Removal

    When I turned the key there was a click and the fan jumped and then nothing happened after that.
  5. I

    International 300 Utility EngineHead Removal

    I don't think the engine is etuck but I can't check as there is a loader on it and I can't get to the front of the engine to try and turn it (The grill guard is shoved right up against the front piece of the hood and I have no good was to move it).
  6. I

    International 300 Utility EngineHead Removal

    I found the rust by pulling the spark plugs and sticking a flexible camera inside the cylinders. The rust appeared to almost be loose and kind of flakey, but that might have just been the lighting and not so great camera quality. I was concerned that if I left it and tried to start the tractor...
  7. I

    International 300 Utility EngineHead Removal

    I discovered some minor rust inside the cylinders of the engine and want to take care of it before it becomes a problem. I was wondering what the best way to remove the engine head with basic hand tools is (I live in the city and this project has a very limited budget).
  8. I

    International 300 Utility Engine Oil Fill Location

    Does anyone know where the fill point for enginoil on the 300 utility is?
  9. I

    International 300 Utility Questions

    Also, do you by chance know the shift pattern for it?
  10. I

    International 300 Utility Questions

    I recently got a 300 utility and have a few questions toward getting it running (it has been sitting for an unspecified amount of time) 1. Is it a positive or negative ground system 2. What type of fuel should I run in it 3. What engine oil is best for it 4. Is there a good way to get Hytran...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top