Recent content by irishman66

  1. I

    Jubilee -30 Amp reading

    Hello All Thanks so much for all the help. I took the VR off and cleaned everything. It's starts right away and runs great! The -30 volts is gone, the only thing the kind of concerns me is while running the ammeter is reading 0 or maybe +1 volts. Shouldn't it be reading much higher to charge...
  2. I

    Jubilee -30 Amp reading

    Thanks for all the help everyone! I pulled the voltage regulator and cleaned everything, replaced it and it is no longer going to negative 30! Now it's struggling to start, and I'm getting some smoke coming off of the top of the relay switch. I'm currently trickle charging the battery and it's...
  3. I

    Jubilee -30 Amp reading

    Excellent! Thanks for the help, I'll be taking a look at that tomorrow. I've been reading some horror stories about replacing the VR, would it be worth it just to replace it?
  4. I

    Jubilee -30 Amp reading

    It is a OEM 6V pos to ground, but it was wired incorrectly for a short period of time before I caught it. It is now wired with the pos to ground. Should I switch this to a 12v system? Thanks for the help, i'm new to tractor ownership and maintenance.
  5. I

    Jubilee -30 Amp reading

    6 volt system and I just started it and it ran great. As soon as I turn it off straight to -30. I"ve been unhooking the battery after every use, but I don"t think this is a great workaround.
  6. I

    Jubilee -30 Amp reading

    Hello All I have a 53" Jubilee that when the battery is hooked up gives me a -30 reading on my ammeter regardless of key position and drains the battery. The battery was hooked up with the negative to ground for about 10 minutes before it was swapped for the correct position. When it starts I...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top