(800) 853-2651
SHOP NOW

Recent content by islandtrac

Yesterday's Tractor Forums
  1. I

    MF135/ MF2135 Lift Hydraulics

    By the knowledgeable responses given by ptfarmer, I suspect that he might also be able to help me resolve my troubling apprehension in putting back together correctly my MF-135 rebuilt Quadrant assembly. It is the one with the dashpot and pressure control. Attached photos will indicate that the...
  2. I

    Replacing worn bush on MF -135 Lift Cover.

    Thanks for that heads-up. I was kinda on the same wave-length about the installation of the new bushings. In another forum (I think) someone concurred with you about the Quadrant roller/shaft configuration. I want to be double or triple sure because I saw a tractor split through and through...
  3. I

    Replacing worn bush on MF -135 Lift Cover.

    Grateful for that timely advice. I could now proceed with less apprehension. I take note of the bushing update as well.. Thanks. I am also rebuilding the original Quadrant but is uncertain of the configuration of the rollers /Shaft. The outer shaft [controlling the Position] is no problem...
  4. I

    Replacing worn bush on MF -135 Lift Cover.

    I forgot to mention that the Top Cover is already off and pretty much everything else for inspection / replacement etc. I observed the the shaft had visible lateral play (up and down) so I thought that I may as well replace the bushings and "O" rings. I did not anticipate that the shaft would...
  5. I

    Replacing worn bush on MF -135 Lift Cover.

    Need some experienced advice on how to remove/replace worn bushings on the hydraulic Lift shaft....... I thought the shaft would slide off easily after the arms were removed.....but this is not so. Seems to be bouncing against the old bushings either way. It appears the splines that engages the...
  6. I

    135 position control lever not working.

    Thank you very much for your advice. Unless someone challenges your experienced opinion in the next few days, I am going forward with the re-assembly with much more confidence. Regards from the Caribbean.
  7. I

    135 position control lever not working.

    To simplify my issue [still to be resolved], I have captured an overview Pic of the respective positions of the Quadrant levers as it relate to rollers. The inset to the lower left displays the location of the Draft Roller [Option-1]. The inset photo to the lower right display the location of...
  8. I

    135 position control lever not working.

    Thanks anyway ! Hoping someone versed with the configuration can render some assistance. I want to avoid making the same error as a previous post where in was probably installed incorrectly causing a catastrophic splitting-crack of the center housing on a similar tractor.
  9. I

    135 position control lever not working.

  10. I

    135 position control lever not working.

    Yes, I share your observation but the vendor didn't infer that major detail when advertising. I would NOT be using the new assembly. My problem is resolving the correct position for the rollers on the "rebuilt project" [left photo]. While the inner shaft/roller (Position) is keyed and foolproof...
  11. I

    135 position control lever not working.

  12. I

    135 position control lever not working.

  13. I

    135 position control lever not working.

    I am having a somewhat related issue. I am trying to rebuild the ORIGINAL quadrant assembly of my 1967 MF-135 Diesel after finding out that the total [New] replacement assembly was not matching the one removed. I am attaching a photo of the two assembly side-by-side hoping that some experience...
  14. I

    MF135 Quadrant Issues

    Really need some help to go forward with my project......
  15. I

    MF135 Quadrant Issues

    Thank you ! but no online vendor takes the time to mention this important detail. They are prepared to sell anyone a new MF-135 Quadrant - no mention of whether its for a for Non-pressure control or vice-versa. Moreover, a tractor equipped with a MK-III Hydraulic pump pose a different problem...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top