Recent content by Jake1985

  1. J

    ym 2000

    Anyone know where the pressure relief valve for the hydraulics is located? I was told mine might need replacing as sometimes the pump works too hard and effects running of the engine.
  2. J

    Bulldog loader

    Update: I did have the seal kit installed for the PTO control valve. When it was opened up the snap ring on the shaft was off and just laying inside. As the greasy dust in the photo shows it did have a small leak on the shaft. Kit was installed and no leaks and so far the hydraulics have not...
  3. J

    Bulldog loader

    Being honest is all I ask. But another thought. I found a youtube post and a guy said the older tractors had only 1 hydraulic pump, so when using the front loader you needed to put the PTO in neutral. I did notice last evening the PTO was on #1. As this tractor is new to me. I must of hit the...
  4. J

    Bulldog loader

    Winston, Since the return line from the loader goes to the control valve under the seat and this control valve also works the 3- point, could this be the central point of my problem? Could something in the valve get plugged and stop both the loader and 3-point from working? Sothern Global sells...
  5. J

    Bulldog loader

    There is no stop valve under the seat.
  6. J

    Bulldog loader

    Yes Winston I believe the loader lines are running as illustrated. A line runs from the pump to the bottom of the control valve. Then there is 4 lines in a square for up/down and tilt. At the top on the valve is a line running to the tractor under the seat. Everything works great for approx. 15 min.
  7. J

    Bulldog loader

    No round handle stop valve between my legs.
  8. J

    Bulldog loader

    Winston, what should be my next move to fixing my problem?
  9. J

    Bulldog loader

    Evening all. I have an update. I ordered, received and put the new hose,#29, on today. Once again after 15 min of working both the 3-point and front loader quit working. Both the 3-point and the loader stay where they are, no movement. After waiting 10 min I tried putting both the 3-poiint and...
  10. J

    Bulldog loader

    Right I forgot about metric size. I will order today. Once I change out I will let you know results. Thxs.
  11. J

    Bulldog loader

    I bought the tractor in Nov 2024. Been an issue ever since. Might be why it was sold. Since it doesn't happen until 15 minutes of running there was not a problem when I checked the tractor out. You are suggesting I replace #29 before I change out the hydraulic hose? By chance is this just a...
  12. J

    Bulldog loader

    Just got home from work. I took pics staring at the hydraulic control. Pic #3 shows #29 your hose. It is pretty cracked up. The hose which jerks goes up to under the set as shown in the last pic. Thank You Winston
  13. J

    Bulldog loader

    Sorry, 3 point does not work.
  14. J

    Bulldog loader

    Morning, Well I have a follow up on this issue. Never a simple thing. LOL I changed out the hydraulic fluid. I took the screen out and cleaned it. I ran the tractor over the weekend using the front loader. Once again after 15-20 min of working the loader froze up. the bucket doesn't tilt nor...
  15. J

    Bulldog loader

    Thanks Winston. I will check next time it happens. I have the fluid, so game plan is to clean the screen and change the fluid anyway.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top