Recent content by JAS-L

  1. formerly ny bill

    Saturday auction near Brooktondale NY

    did anyone go? I am wondering what the tractors brought. 3388, 3588, 966. thanks.
  2. R

    58 CASE 320 CRAWLER WIRING SCHEMATIC

    WOULD ANYONE HAVE A 12V WIRING SCHEMATIC FOR A "58" CASE 320 CRAWLER, THAT I COULD COPY, DOING A RESTORATION. REGARDS RJZ.
  3. P

    Graverly "L" walk-behind mower

    I've gotten a hole of a n old Graverly mower, this is the one with a single blade round type mower, also has a sickle bar, an extra rear end , I can't find an old book on it, would like to get it running, I also need a starter. It's chain driven, I've found the chain and sprocket but not the...
  4. Kirk-NJ

    Ferguson back blade on CL

    Could be a ferguson back blade on CL for someone looking to restore one. Blade
  5. tomstractorsandtoys

    update 4020 not running right

    Several months ago I posted about the 1968 4020 that Dad bought new not running right. Had a slight miss from about 1700 rpm on up. Tractor has a m&w turbo and the miss was not real noticable but bothered me when running it. I had the injection pump to a shop and rebuilt and bench tested and put...
  6. J

    Jacques Portable Power Saw

    What's up guys, Long time reader first time poster. :-) I've done a lot of research and can't come up with much so I was hoping someone on here could give me some insight. I have a Jacques Portable Power Saw with a 30" blade that was my fathers. It has been sittin for a really long time but...
  7. F

    Model M Touch O Matic rebuild

    Has any of ever rebuilt ( new seals n gaskets ) a touch o matic lift on an early 1948 model M. Are things available through JD dealers. Any advice will be appreciated Thank you.
  8. P

    Contemplating H Engine Rebuild

    I have a 43 Kerosene H that still has its kerosene head with fire crater pistons. It’s a fixer upper I’ve been tinkering with over the years. Since I’ve had it, it has always had an internal engine noise and a lack of power. It would run though. Last year I had found the head gasket had been...
  9. A

    Waukesha 195 Small Chamber Head Casting #

    I am looking for the casting number(s) for a Waukesha 195GK with the smaller combustion chamber. I've been told the combustion chamber in this head is the same as found in the Massey 1100 gas head. I would appreciate it if you can help. Thank you!
  10. E

    BX2750 Snow Blower

    Had a little problem this weekend the wire worm gear that turns the shoot ate it's self Looking to replace with something stronger - any thoughts
  11. M

    435 GM

    In a local sale paper today. "Barn find", 4400 hrs., original paint, with #9 3-pt mower. $12K, is that a reasonable price or someone trying to flip it? Not interested myself, just curious.
  12. S

    Farmall cultivator identification

    I've got a 140 that had 2 sets of cultivators with it when I bought it. The 140 is a hi-crop with 36" rear wheels. One set of cultivators came on the tractor and appears to have been modified on the right front lift. This set is about 4" longer than the others and is turned into the middle. The...
  13. R

    Battery chargers on a timer?

    I have four batteries at the vacation house. Tractor, dual purpose for the pontoon and 2 Tigersharks (jet skis). Sharks are about 350 amp, toon is 1000 and tractor 900 amp. .75 amp battery tender jr on tractor, 1 amp charger on toon, .50 amp float, (HF) on each ski. Is a half hour a day enough...
  14. L

    Question for Michigan Readers---mainly

    I am at Clare, Michigan and I am looking for a piece of pipe about 10 ft. long and approx. 4 inches in outside dia. and looking for another piece of pipe about 6 or 7 ft. long that the first piece will fit into. Would like heavier type wall thickness. Used would work and am willing to travel...
  15. J

    HOW MANY LEFT?

    We just purchased a John Deere 2010F, Forklift. I see the production#'s are 279 total built. Does anyone know where I can get the serial# researched?? Do you have one? Like to talk with you. Thanks!
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top