Recent content by Jeremiah3000

  1. J

    7209 FEL

    That's 2810 that I recently baldt has A7209 front end loader , I was curious if anybody knows what the lift capacity of this front end loader is, I've ordered a manual and everything for it and I'm sure it will be in the manual just thought I would ask
  2. J

    2810 sometimes starts

    Well, finally after tracing all wires back, I found that the charge wire going to starter solenoid had hardened, and broken in two but with the insulation still in tact. Fixed it, battery is finally charging!
  3. J

    2810 sometimes starts

    Okay, am I missing something? Still no charge voltage to the battery, where does it go from voltage regulator in between the battery
  4. J

    2810 sometimes starts

    I appreciate your response and time, I had that same issue with my 3000, but this is a voltage/ampdraw issue. Mine clicks at the starter solonoid everything, but I believe its drawing too many amps, and slowly draining the battery, which doesn't appear to be charging. My alternator has 14 or so...
  5. J

    2810 sometimes starts

    OK, when I do a search for the voltage regulator there are I guess 3 versions come of mine is the Motorola, does it matter which one we get , my local New Holland dealer has some generic brand
  6. J

    2810 sometimes starts

    OK, when I do a search for the voltage regulator there are I guess 3 versions come of mine is the Motorola, does it matter which one we get , my local New Holland dealer has some generic brand
  7. J

    2810 sometimes starts

    title states it, it always clicks, has a new solenoid, i cleaned the ground cable, and attachment at tractor. Also has new battery, both cables and terminals are in great shape. I believe I'm having a charging issue. The alternator puts out 17 volts on large wire and 14.4 volts on smaller (at...
  8. J

    Bought a 2810

    Okay, now that makes sense! Thanks for that explanation, I too couldn't figure out the two needing to be all the way up, so I was overthinking the whole thing. Busted a hydrolic hose on the FEL today using it for a project at my work! I've got a mutual agreement though when I use personal tools...
  9. J

    Bought a 2810

    Can someone explain the draft control on this tractor. The 3000 was more or less an "on/off" lever, this one is side by side with the 3pt hitch
  10. J

    Bought a 2810

    Well it taps the 2500 on the cluster!
  11. J

    Bought a 2810

    Makes sense, just wasn't sure. I'm definitely a newbie with the FEL, I've caught on very quickly as far as controlling the bucket/foot-throttle, but now I've got to get better at anticipating how much it'll actually do while driving around. I've gotten stuck twice today and my neighbor has had...
  12. J

    Bought a 2810

    Some technical questions, I'm curious what exactly rated engine speed is, my 3000 wouldn't rev past 2200 rpm (which was its rated speed), this tractor will rev right past that. Is it okay to work it at those speeds, or just drive around? Or should it be reving that high at all?
  13. J

    Bought a 2810

    Thats next on the docket, you can hear it try the solenoid everything, that already eliminated the neutral switch the way i see it, still gonna bypass the key switch, sometimes they make contact just not good contact... I'm not ruling out the solenoid either, I've had plenty of bad ones right...
  14. J

    Bought a 2810

    I put the battery in, its clean! Dielectric grease and all
  15. J

    Bought a 2810

    Well, got some sort of starting issue, just randomly decides when it wants to turn the engine over. Supposedly has rebuilt starter, looks like a fairly new solenoid on the starter too. Battery is brand new for sure.... Also, gonna do a filter and fluid change all over, any other items I...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top