Recent content by JJ/GA

  1. J

    Oil filter-NAA, Jubilee

    Thanks Dig, there is a dealer nearby and I will check with them soon. The motor is at the machine shop and I may need to go to dealer for other parts as well. JJ
  2. J

    Oil filter-NAA, Jubilee

    Is there an OIl Filter conversion to spin-on filter available for these engines in stead of having to continue using the cartridge type. Any assistance will be appreciated. I will have other questiions as work on rebuilding this Jubilee. Thanks, JJ
  3. J

    Oil Pressure gauge

    Hello,Michael I have 49 TO20 and the oil pressure gauge(OEM)went 0-50. YT"s gauge appears to 0-60. I would try Steiner Tractor Parts the picture on their web site may be 0-50. Hope you find one. JJ/GA.
  4. J

    Voltqage regulator wiring

    Are you converting to 12V or is still 6V. If you are still 6V it is a positive ground and the negative goes to the starter switch. Post that info and that will help diagnos the problem. good luck. JJ
  5. J

    Hyd drain plugs- TO20

    Lance J, I have a 1949 TO20. There is a mounting bracket for a drawbar that apparently blocks it from being seen unless you looking straight up the center hole. I will check it out in the morning. Thank you for reply and thank you Richard L for directing me to the location. JJ
  6. J

    Hyd drain plugs- TO20

    Hello first time post but have been reading and learning awhile. The shop manual says there are three drain plugs for draining the trans, rear end and hyd underside. I can only find 2. Where is the third hiding? your help is apreciated. JJ
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top