Recent content by JLM/ Minn.

  1. J

    Need Help With Propane Tractor

    I had a similar problem with my 560 Farmall propane--I replaced the vaporizer diaphram and valves and "set" them and cleaned the water lines within--and leading to the vaporizer. It worked good for a little while and then did the same thing--like starved for fuel. I took it apart agin and was...
  2. J

    445 keeps running when key is turned off

    I would agree with Andy as to things to do--on first glance the "backlash" usually indicates improper timing.. I however always do something else on a REGULAR basis ---before shutting off the tractor--especially after HEAVY loads: I allow it to cool down at a moderate idle --you only need to...
  3. J

    M5 LP questions

    YOu can get parts for the valves and do them your self--it is not hard--need screw on caps for the fill/pressure release valves if you don"t have them on now--they are also avail reasonably. I can give you the names and numbers; addresses of the places if you want. The starter should be about...
  4. J

    M5 LP questions

    You can get a filler valve and hose to attach to 500 gal propane tank and fill from there, and a air/vapor release valve to "bleed" off vapor (On smaller valve) so tank fills better/faster. I have three M-5 propanes and other propanes (MM, Farmall and Case and they run well and less expensive...
  5. J

    MH self propelled two row picker

    Don"t know---it has been sitting on site for several years--looks like it is all there though.
  6. J

    MH self propelled two row picker

    It is in western Minn, near Ortonville, Mn. (on SD) border. They want $150 for it. Let me know if you are interested.
  7. J

    MH self propelled two row picker

    Need to find a home for this unique machine by approx. 9/15/07 or it goes to scrap yard I guess. Anyone interested contact me. I feel that it should be preserved.
  8. J

    Hey all of you i am making a new tractor site

    I think this is a good idea--sometimes we need help NOW and may not be able to wait until someone like me with POOR computer skills (I push the wrong button and loose all the info or the site or freeze up computer) can ask a question to help in a project, or wait a while and try to recover a...
  9. J

    If you could have any MM which would it be?

    I"d like a AT-4-1600 or G708 or just fix my G1000 Vista Diesel----but 90% of my MM (which I use at the farm) are LP--as well as LP in "some other brands".
  10. J

    moline jet star project need help

    The tranny fluid works--an old mechanic at MM (Hopkins facility) did this when some of the engines out in the "bone yard" were hauled in to use and were stuck.
  11. J

    jet star 3 value

    I think that $2500-4000 possible would get most--less if in poor condition. I paid 3400 for mine with an implement.
  12. J

    OT - Where to advertise land? Find modern tractors online?

    Ag Week from Grand Forks, N.D. and The Aberdeen (S.D.) Green Sheet and Fargo (N.D.) Forum on Fri? are some sources that have WIDE distribution and target MANY farmers and implement dealers.
  13. J

    MH self propelled corn picker

    Do Not know if previous answer reached you or not. The picker is in west central Minn. and should not be too far from you. I am ONLY trying to find a good home for it, and NOT TO SOMEONE WHO WILL JUNK OR DISMANTLE IT or RESALE it for a BIG profit!! I do NOT have direct control of it, but...
  14. J

    MH self propelled corn picker

    I know of one of these pickers that needs a new home--otherwise it is to be scrapped---seems a shame as I have only seen one other and that was at Farm Fest in Minn this year. if interested, contact me and I will tell more.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top