Recent content by jm42

  1. J

    2955 electrical problem

    I grounded several and they come on. Fuel gauge must be the sending unit? I am just kind of nuts about things working but i am about to raise the white flag. So far all circuits are checking good. Thanks
  2. J

    2955 electrical problem

    These have specific functions like air filter, battery etc. they come on when key is first turned on then go out after started. Only other time they should come on is if a malfunction occurs. They have power but do not come on. I am thinking the ground to this circuit is not working. I have a...
  3. J

    2955 electrical problem

    I?ll check it out this evening to see.
  4. J

    Cracking concrete

    When building homes we have had several new basement walls leak, the company that poured the walls for us sent a person out that injected an epoxy in the cracks that would stop the leaks. Guaranteed ? I was impressed that the injection pushed the epoxy through 12? walls
  5. J

    2955 electrical problem

    I am not savy with the diagrams but I think the issue is related to the ground side of the lights. I am trying find someone local to help me understand what turns on the ground to the lights when the key is turned on. Thanks for your help. The lights have power and when I manually ground them...
  6. J

    2955 electrical problem

    Yes it does, I?ll need to have someone that can interpret it for me.
  7. J

    2955 electrical problem

    Ok, back at it. Left dash Assy should have five lights come on when key is turned on. This will not happen. All other functions of the tractor work. Replaced and or refurbished all the circuit boards now, all fuses are good and grounds tested and an additional ground added. Still cannot get...
  8. J

    Jd 2955

    Thanks, looks like that is the direction I am heading in
  9. J

    Jd 2955

    Ok I checked the wiring to the fuel tank sending unit and found no power, checked pin 7 out of board for fuel gage and no power. I was thinking board but wanted to rule out all possibilities before repair or replace.. thanks!
  10. J

    Bush Hog PTO Shaft

    Just a thought, could you use a non splined over top the spline and increase the shear bolt size to 7/16. Mine is 1 3/8 diameter non splined shaft with a 7/16 shear bolt.
  11. J

    Jd 2955

    I did that and also installed a new ground to the dash chassis. Good thought! I checked pin 8 on socket housing and the ground Is working.
  12. J

    Jd 2955

    Issue with electrical problem left side dash. If anyone has experience with these tractors I would appreciate some help. Right dash has new main board and fuse board . Left side should have five lights come on when key is turned on then they go off after started. they are not coming on...
  13. J

    9400 jd combine

    Thanks, I only have 1500 Hrs on separator and still looks good.
  14. J

    9400 jd combine

    Curious of how many separator hours you have, I own a 9400
  15. J

    Yield monitor

    Anyone know of a source to find used yield monitors. Trying to find one for my jd 9400. New ones are priced high.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top