Recent content by JohnAR

  1. J

    temp gage not working

    No the coolant level is full. I put a new sending unit on and it made no difference. Having recently purchased this tractor I thought I would replace the thermostat just to make sure the previous owner wasn't running it without one. The old thermostat tested fine in hot water but I put the...
  2. J

    temp gage not working

    Thanks I am not that electrical so I didn't think of grounding it. I did that and the gage works. I went ahead and ordered a sending unit. I thought while I was at it I would get a thermostat just to have on hand but it was $39. I figured it would be a cheap run of the mill item but I was...
  3. J

    temp gage not working

    Just noticed the temp gage on my 1920 isn't reading. I figured when the key is turned it should peg out to show it works but it isn't. When the tractor is warm the gage still won't move. I figured maybe a stuck open thermostat but that should have nothing to do with the gage not moving at...
  4. J

    bought a 1920

    I will look at the possibility on the orifice. I never even heard of the 1920 until this one was advertised but in my research I haven't heard anything bad. However I haven't heard of most tractor models since I don't farm and don't do much with tractors. I will say having a tractor since I...
  5. J

    bought a 1920

    Well I am used to the 430 with a bucket that will just push anything out of the way. I agree after using the blade that it makes quick work of it. I do get a lot of drifting though. I hope parts are around because I plan to have this little tractor for a long time. In it's condition I expect...
  6. J

    bought a 1920

    Ok that is probably it because I slowed it down to lift the blade slow. I thought that was only for the three point hitch.
  7. J

    bought a 1920

    I will be looking at options because this bucket is not just short in length but in depth as well.
  8. J

    bought a 1920

    Thanks for that information I will be sure to do that.
  9. J

    bought a 1920

    Just purchased a Ford 1920 to use on my 3 1/2 acres to move things around and mostly for snow removal. I have a couple questions. The bucket dumps very slow. Why might that be? I wonder if changing the hydraulic filter would help. I put a small dent in it by one of the head lights. Is the...
  10. J

    In dire need of power steering pump

    I am still in dire need of help. My tractor is is still at the dealer. It has a Davis loader and they are going to try to run the power steering off of the loader hydraulics.that was last week and I haven't heard from them yet. I really don't want to go that route if I can avoid it. If anyone...
  11. J

    In dire need of power steering pump

    I have a Case 430 with serial number starting with 819. I just spent $1400 for new tires and rims and then the power steering goes bad. I wish the pump would have gone out first! It has been at the Case dealer for 2 months now and they are not having any luck finding a pump. If anyone can...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top