Recent content by Jono56

  1. J

    2N no start

    Okay, So I did not have spark. I replaced the distributor and I now have spark. My issue is that the tractor still wont fire. I can get it to fire on ether. I checked the fuel bowl and no fuel coming out. Newer carb, so I pulled it apart and got fuel to run in the bowl but still wont fire...
  2. J

    2N no start

    Thanks Bruce, I am going to work through your checklist. I did notice that the new coil spring did not line up very good with concave screw. I had to bend it over to get it to line up. Would a 12 coil cause a no fire? I am guessing that I might have bought a 12 volt from TSC by accident...
  3. J

    2N no start

    Thanks everyone! I am going to double check everything. I have 3.5 volts at the top of the coil. I am wondering if I bought a 12 volt coil instead of a 6v? Box the coil came in is long gone..
  4. J

    2N no start

    Howdy group. Got an problem that I cannot figure out. Kids left the keys on the tractor and burned points up. I replaced the points and coil but now the tractor wont start. I set my gaps correct @.015 but still nothing. Coil is getting voltage on top, but I am not getting any spark. I hooked...
  5. J

    JD 35 Loader

    Could you send me the link that you found?
  6. J

    JD 35 Loader

    The issue that I have is cylinder is odd size and has a square tubing that pins to tractor. I was hoping to match it to the existing one that I rebuilt.
  7. J

    JD 35 Loader

    I need a hydraulic lift cylinder for a John Deere 35 loader. The shear pin in one of my cylinders scratched the cylinder and ram. my local hydraulic shop wants $1,100.00 to build a new one. Anybody out there has one? I don't care if I have to rebuild it... Let me know, Jon
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top