(800) 853-2651
SHOP NOW

Recent content by jrdcase

Yesterday's Tractor Forums
  1. J

    IH 46 Baler Knife Position

    i tried a new style knife on my 46 and couldnt get it to tie. i found tht the old knife had a curve to it where the old one did not whitch effected how the twine slid past the knife. i also found that the setting in the book did not work for me. i walked beside it all day till i got it shimmed...
  2. J

    390 allis haybine

    i have an allis 390 haybine that ive been useing for a couple years and now im buying a discbine. i would sell it if somebody wanted it to restore or for parts. i rebuilt the wobble box and put new sections on it with bolts. the knife broke and i think thats because the arm on the wobble box is...
  3. J

    ih 37 baler

    i have been fighting my knotters on my 46 and got them working the other day. i shimmed the twine knife exactly to the book and that did not work at all. what i found was when i ran it in the field i watched it tie and when the billhook wraps the twine, thhe twine must drag across the knife and...
  4. J

    Hesston 1320 Discbine Leaking Problem

    not the same thing the agco sealer drys when there is an absence of air . ive used it to seal halfs of tractor rearend together works way better than ultra black
  5. J

    Hesston 1320 Discbine Leaking Problem

    use agco flange sealant it comes in a squeeze tube its about 20 dallers a tube. clean the surface good with brake cleaner before u apply it. its made to work for sealing with no gasket. if u need the part number i can get it monday when i go to work
  6. J

    u302 amplitorque problem

    the more i think about it i think its the torque . i hope this guy gets an external_link stimulus check after the parts i priced today! thanks for the imput
  7. J

    u302 amplitorque problem

    i got a u302 a guy wants me to fix im not familar with yellow tractors so i just want to know what im getting into. anouther shop put an engine cluth in it recently and it seems fine. u can put the tractor in gear and it will move a few feet then it will stop with no gringing and no noise. it...
  8. J

    Advice for tractor to pull baler

    cant beat a case 730 or an oliver 88 they can be bought cheap and are great baleing tractors id go diesel they are real efficiant on fuel and easy to maintain
  9. J

    Agco/New Idea Baler??????

    i assume ur refering to inline small square baler? i work for an agco dealer and work with the small and big squares. they are a smooth running simple and reliable. the 7115 agco small square will run 5mph in a heavy windrow but dont take well to being pushed to hard. the inline design only...
  10. J

    White 2-105 Tractor Pulling

    john deere might consider a coupler chain a final drive but ive never broke a chain they get wore out or misalined a 2-105 has atrunyon which is bulletprufe we have run these tractors at 200hp and held up great
  11. J

    What do you use your DC for?

    I have a 49 DC that i pull 5000lbs class and up, a 51 DC that pulls in 4500lb class, a 54 DC with a 514 cu in caddilac V8 with tube chassie pulls modified open class and a 54DC that i cuss at alot its the only tractor that i havent ever got to run 100% correct lol
  12. J

    White 2-105 Tractor Pulling

    take the oval 2 bolt plate off the pump there will be a round disc with 3 bolts i think it takes a 5/16 wrench. they are locted towards the top of the pump.loosten them a little so they are not tight. u will have to slowly rotate the engine to get at them all. there will be a notch in tht disc...
  13. J

    Anybody use chemical applicators on square balers?

    there are several types ive been around harvest tec and they work well most of the time. there are lower budget units that work well. the cheaper the more manual they work. i know a guy who spent 800$ and works good for his small operation. i like siloguard preserveitive because it dont make me...
  14. J

    What fluid to use to clean bearins and internal parts of....

    a 1320 uses a one piece bed . the modular beds have several compartments bolted togeter so if u crack one compartment u unbolt it and slide it out without tearing the whole cutterbed out. i was just out to hesston and they schooled us on the new cutterbeds they are now called "razerbar" looks...
  15. J

    What fluid to use to clean bearins and internal parts of....

    new bearing from agco have a black one piece sel that u can pop out with a pocket srewdriver u it just snaps back in place u dont have to do this but its just something i found seems to work real well
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top