Recent content by jriddick

  1. J

    1950 with detroit to 5.9 cummins

    I have several fwa olivers and the 1950 is the most impressive.I don't believe any other tractor manufacturer has a tractor with this small of cubic inches that will come close to the detroit.Most folks in my area are Deere and international fans. I have a couple of neighbors with a 1066 and a...
  2. J

    oliver 2255

    My 2255 has the 3150 engine and it started making a knocking noise. I can loosing the injector line and knock goes away. I figured I had a fuel knock at best or a bearing issue. I have changed the injector on the cylinder that's making noise but noise is still present. I had put the tractor in...
  3. J

    Oliver combines

    I have a 7800 I will sell but I'm in NC
  4. J

    oliver 7800

    Does anyone have any information on mounting a different brand corn head on a 7800 oliver combine.
  5. J

    1650 Brake Oil Seal

    Take the brakes and brake actuator out then remove the bolts for the housing. Once you get the housing off you will see the seal.
  6. J

    Oliver Pictures - Online Tractor Show

    Here's a few of my father's and mine
  7. J

    2655 transmission

    Looking at buying a 2655 but the gentleman says it will not go in high gear and seems as if it's not there at all. Is this a common problem on the oliver and moline. Also I know people have re powered these tractors but has anyone done any improvements on the transmission
  8. J

    2655 transmission

    I know people have put different engines in 2655s but has anybody changed anything with the transmission
  9. J

    Any one looking for a 1655

    Is the 1655 gas or diesel
  10. J

    2655 horsepower

    How well will a 2655 stand up with a 250 cummins with 240 horsepower
  11. J

    3150-3208 in 2255

    Radiator hose mounts on engine Fuel tank is shorter Front fuel tank bracket Holes in hood are located differently AC compressor brackets They made a different alternator bracket All easy to adjust except fuel tank could be tricky unless you can find one
  12. J

    2150 fender fuel tanks

    Larry it will not be original but you can get light washers off a set of regular oliver fenders which have the correct bowl shape and correct diameter.Lay out your light location and get a hole saw the diameter of the light washer drill and weld light washers from back side.Make sure washers are...
  13. J

    2050 gears

    Thanks for the information
  14. J

    2050 gears

    Is the nut with seal a agco part or get from napa or fastner company
  15. J

    2050 gears

    Has there ever been a revision for the hydraulic pump idler gear and short shaft design.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top