Recent content by JT90

  1. J

    3600 power steering

    I had the same problem with my 3600. I replaced the seal no. 35 in picture and it fixed the leak.
  2. J

    Suspension seat for 3600

    Sorry so long getting back. The seat I have looks like the one TallT is showing less the air shock. The spring in it is just to weak. I have looked at the Big boy seat so I am glad you mention it. I just wanted to see if there were other options. Thanks.
  3. J

    Suspension seat for 3600

    I need a good suspension seat for my ford 3600 because of back problems. Would like to know if anyone has bought one that they like and has had a good experience with it.
  4. J

    play in left axle

    Thank you Janicholson. This diagram is exactly what I need. The problem is around parts no. 18 through 29. Thanks JT
  5. J

    play in left axle

    What I'm hoping is that there is a axle shaft nut behind the distributer gear that can be tighten that will take out the left to right play.
  6. J

    play in left axle

    It's the left rear wheel and it's horizontal play. What's the bull gear.
  7. J

    play in left axle

    I have a 1972 farmall 140 and I notice today that there's a lot of play in the left hand side axle. I got my brother to shake the wheel, and down where the gear that drives the distributer there is a half inch or more of play. I did not have time to look any closer today. Does anyone know what...
  8. J

    clutch/shift problem

    Have inch or more free play and the pto works proper. The guy that installed it said that the clutch came as a unit and only needed to be bolted on.
  9. J

    clutch/shift problem

    I have a 1976 ford 3600. I had a new clutch installed because of age, hours and pto clutch bad. The tractor shifted good before install of new clutch but now with clutch pedal depressed the gear shifters seem to hang up. It's like you can't pull it out of gear. If you kill the engine they come...
  10. J

    check chain quality

    Well I know New Holland is going to be higher just because of the name, but I'm assuming it is also better quality metal. Do you all agree that the metal will be thicker and stronger? I think I'm going to do what souNdguy said and go with hardware store chain. My problem is everything is worn...
  11. J

    check chain quality

    So are you saying use cheap chain buy higher price bracket.
  12. J

    check chain quality

    I need check chains for my ford 3600. You can buy aftermarket kits for 30.00. I just priced NH and it was 115.00 a side.(bracket, chain, u hook with pin). There has got to be a differents in quality. Has anybody used these aftermarket kits and are they any good.
  13. J

    paint for rims

    OK, Thanks. Done third coat today.
  14. J

    paint for rims

    The paint is Tractor Alkyd Enamel 8-22967 out of a spray can and the clear is lacquer 8-22999. They don't tell you much on directions and that's why I called the company. I ask him how long to wait because I had read on this forum that it would wrinkle. They were the one's that said wait a...
  15. J

    paint for rims

    Finished second coat of paint on rims. Look ok. The guy in customer service for Majes paint said wait one week before clear coating. Thought I would mount the tires first then clearcoat. Would ya'll clearcoat or just let it go. First time trying to upload pictures.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top