(800) 853-2651
SHOP NOW

Recent content by k4shf

Yesterday's Tractor Forums
  1. K

    Obliterated serial number on a B.

    there is nothing there to resurrect....the rest of the tag is intact, that portion has been physically scraped/gouged away. It wasn't filed, more like someone used a screwdriver and just kept scratching at it. Maybe somewhere along the line it was stolen, I have no way of knowing.
  2. K

    Obliterated serial number on a B.

    This was deliberately wiped out, the rest of the plate is intact but the serial number actually still shows scratch marks where perhaps a screwdriver was used....
  3. K

    Obliterated serial number on a B.

    My son recently acquired 2 Model Bs. One appears to need minor issues to make it run but the serial number has been totally destroyed. The second is a "parts" machine but I have agreed to restore it. The serial on it is intact. These are stylized and appear to be 1952 vintage. I'm told that for...
  4. K

    Fuel/hydraulic tanks/injector lines

    I have the Bobcat part numbers....665219, 665220, 665221 and 665222. These are the metal lines going from the injector pump to the injectors. We've already replaced the rubber return lines which were dry and cracked. Bobcat parts no longer lists these numbers...so may end up going to a...
  5. K

    Fuel/hydraulic tanks/injector lines

    I did put 743 bobcat in the subject line...does that not show up? So, for all, it is a 743 Bobcat....
  6. K

    Fuel/hydraulic tanks/injector lines

    Have some type of leak from the fuel tank, considering replacing it if can find one...is this seperate from the hydraulic tank? Injector lines seem to be leaking, cover top of block with fuel. Want to replace them, anyone know if they are available new? Fixing this up and probably sell it...
  7. K

    Bobcat 743 Kubota 1702-BA engine injector question

    Yes, we had replaced 3 after resistance testing. Have wire traced to relay now....have to get holes burned in eyeballs on Monday, then when the vision clears up I can get back at it. Tim
  8. K

    Bobcat 743 Kubota 1702-BA engine injector question

    Thanks! I figured worst case was to just grab wire and follow it. Of course, that glow plug is the hardest to get at <smile>. I know where the starter solenoid is...so this one should be easy. (famous last words). But, I should be able to connect a clip lead to it and perhaps hear...
  9. K

    Bobcat 743 Kubota 1702-BA engine injector question

    Clips on meter leads are a bit on small size...thought I was able to measure volts on the plugs the other day. Got a little bit bigger clips today, ran negative direct to battery. No juice. Don't hear relay click. So, either the energizing coil is open or the signal isn't getting to the relay to...
  10. K

    Kubota V1702-BA (Bobcat 743) injector torque spec

    Anyone know off top of their head what the torque value is if I pull injectors and squirt some oil in the cylinders tomorrow? Do these have those "crush" type washer you are supposed to replace? I'll have to pass on replacing at this point but chances are high that I'll replace the injectors...
  11. K

    Bobcat 743 Kubota 1702-BA engine injector question

    The engine ran less than 6 weeks ago. Had to drive onto trailer, then off trailer to park. So, this is a "hard to start" issue, not a "won't start". Throughout the entire thread I've pretty much given the whole story....we initially used ether (when glow plugs were non-functional). Since they...
  12. K

    Bobcat 743 Kubota 1702-BA engine injector question

    Very true....but I dd claim it as a starting issue and not as a suddenly stopped issue. The first day I was trying it would barely turn over with good battery (fully charged and tests fine) but it was trying to move while cranking. I think the tires may still be trying to turn and it my be...
  13. K

    Bobcat 743 Kubota 1702-BA engine injector question

    The bobcat was parked and the fuel cutoff cable was pulled as per normal. I had opened the air intake (pulled filter) to squirt a mix of diesel and 30# directly in. The filter looks to beyond it's normal life but I am unable to push the button to see how restrictive it is, since I do have a...
  14. K

    Bobcat 743 Kubota 1702-BA engine injector question

    The engine has ran within the last 6 weeks and I just changed the cable for that fuel cutoff as it was pretty much frozen. When disconnected, it is spring loaded and goes to the "on" position. I did replace with a genuine bobcat replacement (sorry, won't do that again, 3 figure pricing for it)...
  15. K

    Bobcat 743 Kubota 1702-BA engine injector question

    Since I do have smoke, at least some fuel is getting through but it could be drips....once this hurricane is passed by, I'll go ahead and fill the fuel, change filter, bleed, then go to injector pump and bleed, then loosen each line to injector and bleed each one. If still no fire, I'll pull...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top