(800) 853-2651
SHOP NOW

Recent content by Kaden

Yesterday's Tractor Forums
  1. K

    K321 knocking

    The crank clearance was .002 and kohler allows .0025 i wonder if whoever rebuilt it before had the crank turned but I wouldn’t think that clearance would cause this amount of knock there is also a lot of metal shavings being produced so a lot of me is thinking this is a piston slap I have also...
  2. K

    K321 knocking

    I have rebuilt this kohler K321 and had it apart a handful of times there was a .010 piston in it so I ordered a kit to rebuild it using that size already bored out and when I start it there was a awful knocking sound so I tore it down and put a new rod in it I checked the clearance and it all...
  3. K

    Kohler K321Connecting rod

    Got ya thanks
  4. K

    Kohler K321Connecting rod

    Where I circled in red it says 45-55 ft lbs and the one I’m working on is before that serial number but it doesn’t really state what that torque spec is for
  5. K

    Kohler K321Connecting rod

    Yup that would be my problem 🤦🏻‍♂️ I hate when you know better but can’t find the problem then it’s something simple but it still doesn’t explain what the little blooper is at the bottom of the manual stating before a certain serial number 45-55 I’ll see if I can post a image up
  6. K

    Kohler K321Connecting rod

    Okay I'm rebuilding a Kohler k321 but I have come to a halt. I rebuilt the engine torqued the rod to 50ft lbs. got it back in the case 444 that it goes in I started it and it ran good till about a hour of running it then I heard a knock... I shut it down and turned the crank by hand and sure...
  7. K

    John Deere 246 planter

    Thank you, I found the decals for the boxes, but I'm still unsure if there's a little decal to show the model of the planter or not. The planter had some cheap stickers on it that said 246 but, definitely not factory.
  8. K

    John Deere 246 planter

    I have a 246 planter that I’m restoring and I’m having trouble finding the decals to it. Does anyone know where to get these decals? I believe there’s 2 1956 logos one for each planter box and I’m unsure if there’s a sticker stating 246 or not. As well as the dimensions of the stickers that go...
  9. K

    John Deere 40 not charging unless low rpm

    Ok at a idle the voltage is roughly 6.3-6.5 and at full tilt it it’s about 7.9 so the charging system must work fine and the gauge goes to positive when not running with lights on so I reckon that means the amp gauge is backwards so I had a series of wrongs with the charging first there was a...
  10. K

    John Deere 40 not charging unless low rpm

    Yes it’s a positive grounding system and some people mess that up but mine is set up right
  11. K

    John Deere 40 not charging unless low rpm

    As I said I don’t think it’s loose and yes alternators take a lot more bump to spin as opposed to a generator
  12. K

    John Deere 40 not charging unless low rpm

    I believe the belt is tight but wouldn’t hurt to double check it also no question is dumb
  13. K

    John Deere 40 not charging unless low rpm

    Thank you this is very helpful I will go through all this when I get to the tractor 👍🏼
  14. K

    John Deere 40 not charging unless low rpm

    Yes I have 2 voltmeters and a battery tester thanks for double checking
  15. K

    John Deere 40 not charging unless low rpm

    Ok thanks I can’t access the tractor currently quite sadly but I will in about 2 days sorry I miss understood what you were saying. I do know it charged fine before we restored it about 4 years ago and it seemed to be fine the first year or so after but then I started having problems with it and...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top